Today we are going to show you, UWSs angled truck bed toolbox, part number UWS00419. This box is built here in the US out of 0.63-inch aluminum tread plate and its finished in a black powder coat. UWS also covers the box with a one-year warranty. Theres 6.6 cubic feet of usable space in this box and now well go over some measurements but first well need to open the box to do so. The box measures 60 inches long and measures 19-1/4 inches wide by about 13-1/2 inches tall. The lid of the box is reinforced and filled with form.
Its designed to help insulate and protect the contents of the box but it also add some strength and stiffness to the box so that we can close it by grabbing one corner of the lid and the lid will not flex. Theres a form gasket that goes around the lid to help keep moisture out of the box. There are two gas struts on either side of the box that help to open the lid and hold it open while you are loading and unloading. Along the entire length of the lid is piano hinge that helps make opening and closing the box easy. Theres also a sliding storage tray that keeps small items close at hand but you can easily move them out of the way to get at whats below.
Theres also two small storage trays on either side of the box. The two latches on the driver and passenger side are connected with a rod. Pulling one latch actually opens both that way you can access the box from either side of the truck. The drivers side latch is lockable so you can secure the contents of the box when you dont need it open and thats it for our review of UWSs angle truck bed toolbox, part number UWS00419.