Today were going to review part number TWSP72TB. This is the Tow Rax, low profile floor track for tie down anchors. This part is aluminum and black in color. And it is a six foot long piece of floor track. You could mount the study black anodized aluminum track to the floor or wall of your trailer and then hook in tied on points, which are sold separately, so that you can quickly and easily secure all kinds of cargo. The low profile design of this track does not hinder loading or unloading.
This convenient track will bolt to trailers floor or wall and provides the tie down points. Basically, you can use theyou can mount the stud tie downs, which are sold separately. I happen to have one here. It is part number TWSPDSTD and you can mount these anywhere along the track for maximum versatility. Basically, how these would work is it has if you look it here, theres a spring loaded part right here.
On the bottom you have a circle and then almost a half a circle here. Basically, you line up the circle, if you look at the track, they have circles in it, so if you just line up the circle on top of it and then as you push it down, thats spring loaded, you can slide it and itll lock the clip into place. So you have a sturdy tie down. And to remove it, if you just pull up on it, slide it and itll come right out. The low profile design of this track will ensure that loading and unloading can be done with ease.
They are tapered edges, which are inaudible 00:01:44 tripping and catching. This is made of a rugged, lightweight aluminum construction and this part has a black anodized finish on the aluminum track. This six foot section has counter sunk mounting holes every twelve inches. Theres one here and theres one right here. The mounting hardware is not included.
Now you can also purchase additional sections of track to let you create a complete cargo control system. Now another extra piece I want to show you thats sold separately to finish your system is the end caps, which is part number TWSPPGF. These end caps can be used to finish off your track system. If you look on the very end, these are a hard plastic with a mounting hole. These would insert into the track and then youd mount it to your wall or floor and give you a finished look to your track. These are sold separately. And, again, the dimensions on this, the overall length of this part is 72 inches or six foot. The width on this is 2 and 5/8 inches and the overall height will be going up one half of an inch. And that should do it for review on part number TWSP72TB. .
