Okay today we are going to take a quick look at Rhino Racks custom DK clamps for their for the 2500 series roof bars part number DK320. Inside the pad and clamp kit, you are going to find four clamps and four pads. These are vehicle specific to this application. The pads are designed to fit the contours of the roof of the vehicle and the clamps are designed to fit around the doorframes so that you have a good snug fit. These parts are designed to work with Rhino Racks 2500 series foot and real quick well show you how the whole system goes together. First, well take the door off.
The rubber pads are going to sit on the bottom of the foot here. They just push over and theres a center pin on the pad thats going to line up with the center hole here on the bottom of the foot. To install the clamp on your foot, all you have to do is back this tension bolt all the way out, put the clamp over it and reinstall the bolt. This whole assembly then will seat at the edge of your vehicles roof and this clamp will fit around the doorframe and youll take the tools included with the bar kit to tighten down that bolt and thats it for our review of Rhino Racks custom DK clamps part number DK320.