Today were going to take a quick look at the Pro Series Round pipe mount swivel jack part #: PS1401060303. Now Pro Series covers this jack with a limited one year warranty and it has a lift capacity of 2,000lbs. Were going to go over a couple of measurements real quick to give you an idea of the size and travel of the jack. From the center of our mounting system down to the bottom of the footplate we get about 11 inches. We have another one of these jacks that weve extended out all the way. Well take that same measurement again from the center of the mount to the bottom of the footplate and we get about 21 inches.
The difference between those two measurements, 10 inches, is known as our lift or jack travel. This is a side wind jack with a nice ergonomic handle that makes it easy to operate the jack. The outer tube is finished in a black paint and the inner tube as well as the welded on footplate are zinc plated for good corrosion resistance. The footplate is also going to provide a nice flat stable surface for resting the nose of your trailer on. Well flip the jack over to the back and you can see our mounting system.
its a weld-on jack where youll take this piece of tube out and weld it to your trailer frame. The jack body will fit over this tube and it can swivel and pivot on it. That way you can pull your jack up flat when youre towing your trailer down the road. You just have to remove the pin, turn it to where you need it and reinsert the pin. And thats it for our quick look at the Pro Series round pipe mount swivel jack part #: PS1401060303..