Today, were going to review part number SLL43AB2, this is the Optronics 4 inch round dual flash LED warning light. This light is an Amber 4 inch round strobing dual flash warning light. Its great Replacement for incandescent lights because there are no bulbs to Replace, no brittle filaments to break. It uses a sealed housing lens And it is a grommet mount. The grommet would be sold separately. It Does have 22 amber LEDs, and the LED light draw on this light is an Access point 448 amps at 12.8 volts.
This will work with 12 volt and 24 volt systems. It is DOT approved and there is a life time warranty On the LEDS. Now this light is a function 2 light, which is stamped on The back. When this is used with a function one light and then wired Together it would give you an alternating flash. In other words, when This one would flash then the other function one light would flash and Then go back and forth, so that it would be alternating.
This does Use a Three-wire pigtail plug for the wiring, which is sold separately. This One here is part number A45PB. I am going to hook it up and basically Show you what the light would look like and how it flashes. So, if we Just plug in the three prong wiring and I have a power supply right Here, grounded. That would basically show you the dual flashing Pattern.
Now, what I am going to do is take a function one light; it is Stamped on the back function one. Basically, we do the white for the Ground, the black we would connect together and then on the red, That would show you the alternating Flashing pattern when you wire A Function two with a function one. That should do it for the review On Part number SLL43AB2. FoxTranscribeSteuart Tower, 1 Market St, Ste 500, San Francisco, CA 94105t: 800-225-6124, firstname.lastname@example.org .