Today, we're going to go over product number AM3H390. And this is a Kenda 205/65-10 Bias Trailer Tire with 10" white spoke wheel. This tire wheel combo will have 10" x 6" wide wheel. The 10" diameter would be measured from here-to-here. And it's a 6" wide wheel. A critical measurement would be the bolt pattern.
On this wheel, it is 5-lug wheel on 4-1/2" bolt pattern. And on an odd number of bolt pattern wheel, the best way to measure the bolt pattern is if you drew a circle through the center of all 5 lug holes and then measured from center of one bolt hole to that outer diameter of that imaginary line you drew in that circle and that it is 4-1/2". So this would be 5 on 4-1/2" bolt pattern. Another measurement would be the pilot hole diameter. This is critical, because this would go over the hub that is on your trailer.
When we measure the diameter on this one, it is 2.8". This wheel uses a wheel bolt size of 1/2"-20. And now onto the tire, this is a Kenda 205/65-10 tire size. This is a load range: C. It is a 6-ply rated tire, which has a maximum load capacity of 1,100 pounds at 50 psi.
This tire is of bias construction, which means the belts inside the tire would run the length of the tire which will give a little bit firmer ride as opposed to a radial constructed tire. This package will come with a limited 2-year warranty. And that should cover product number AM3H390, The Kenda 205/65-10 Bias Trailer tire and Dexstar 10" white spoke wheel.
In this video we are going to describe how to measure a trailer steel wheel. I have two examples here one is a 14 X 5-1/2, 5 on 4-1/2 bolt pattern steel wheel. This other one is a 16 X 6, 6 lug on 5 steel wheel, and the way to measure to know what size it is, on the diameter of the wheel, in other words what size tire will fit on this wheel is you want to measure from the inside to the inside where the bead seats and protrudes 60 inches. In other words thats the bead seat to the bead seat. You do not want to measure over all length from edge to edge, okay and to measure the width of the wheel. Again you will not want to measure, do not measure overall because it will show 7 inches incorrect.