Today we are going to go over part number AM3H380. It's a Kenda 205/65-10 bias trailer tire with 10" Dexstar galvanized wheel. This packge includes a Dexstar galvanized steel wheel, which is galvanized for superior corrosion resistance. Few measurements on the wheel will be 10'' is the diameter, which is measured from inside-to-inside. It's a 6'' wide wheel. The bolt pattern is a 4 lug 4'' bolt pattern.
To measure the bolt pattern on this wheel, you'll measure from the center of 1 bolt hole to the center of the other, which will give you the 4'' diameter. This wheel has a capacity 1,650 pounds. It uses a wheel bolt size of 1/2"-20. Another measurement you will need is the pilot hole diameter, which is the large hole that will go over the trailer hub. On this wheel the diameter will measure 2.8''.
Then on to the (weak) tire. This will be a Kenda 205/65-10 tire size. This has a load range C capacity tire, which has 6 ply rating. It has a maximum load capacity of 1,100 pounds at 50 psi. This tire is of bias construction, which will mean the belts of the tire are constructed to run the length of the tire.
This will give a little bit firmer ride as oppose to a radial constructed tire. This package comes with a limited 2-year warranty. And that should do it on part number AM3H380, the Kenda 205/65-10 bias trailer tier on a 10'' Dexstar galvanized wheel.
In this video we are going to describe how to measure a trailer steel wheel. I have two examples here one is a 14 X 5-1/2, 5 on 4-1/2 bolt pattern steel wheel. This other one is a 16 X 6, 6 lug on 5 steel wheel, and the way to measure to know what size it is, on the diameter of the wheel, in other words what size tire will fit on this wheel is you want to measure from the inside to the inside where the bead seats and protrudes 60 inches. In other words thats the bead seat to the bead seat. You do not want to measure over all length from edge to edge, okay and to measure the width of the wheel. Again you will not want to measure, do not measure overall because it will show 7 inches incorrect.
