Today we're going to go over part number AM3H350. This is a Kenda 205/65-10 bias trailer tire on a 10" Dexstar white spoke wheel. This wheel has a white powder coat finish made by Dexstar. And a few dimensions on this wheel will be the 10'' diameter of the wheel as measured from the inside to the inside. It is a 6" wide wheel. This wheel has a bolt pattern of 5 on 4.5".
And the best way to measure a bolt pattern that is of odd lug holes, as if you take and draw a circle through the center of all five lug holes and then you would measure from the center of one lug hole all the way across to the imaginary line that is drawn and it is 4.5''. So this bolt pattern would be 5 lugs on a 4.5'' bolt pattern. This wheel has a capacity of 1,650 pounds. It uses a wheel bolt size of a 1/2"-20. Another critical measurement is the pilot hole diameter.
This is the large center hole that will fit over the hub on your trailer. On this wheel when we measure it, it will give you a diameter of 2.8''. Now, we'll move on to the tire. This is a Kenda Loadstar tire, size 205/65-10. This tire has a load range B, which is a 4 ply rated tire and has a maximum load capacity of 910 pounds at 35 psi.
This wheel is a bias construction, which means the belts on this tire will run the length of the tire, which will be a little bit firmer ride when compared to a radial constructed tire. This tire/wheel package has a limited 2-year warranty. And that should cover it for part number AM3H350, the Kenda 205/65-10 bias tire on a 10'' Dexstar white spoke wheel.
In this video we are going to describe how to measure a trailer steel wheel. I have two examples here one is a 14 X 5-1/2, 5 on 4-1/2 bolt pattern steel wheel. This other one is a 16 X 6, 6 lug on 5 steel wheel, and the way to measure to know what size it is, on the diameter of the wheel, in other words what size tire will fit on this wheel is you want to measure from the inside to the inside where the bead seats and protrudes 60 inches. In other words thats the bead seat to the bead seat. You do not want to measure over all length from edge to edge, okay and to measure the width of the wheel. Again you will not want to measure, do not measure overall because it will show 7 inches incorrect.