Today we're going to review part number AM3H330. This is the Kenda 205/65-10 bias trailer tire on a 10" Dexstar white spoke wheel. This wheel comes with a white powder coat finish and is made by Dexstar. And a few measurements we'll take on this wheel is the rim dimension, which is 10", which is measured from inside-to-inside. It is a 6" wide wheel. This wheel has a bolt pattern of 4 lugs on 4".
And on a bolt pattern, you'll want to measure from the center of one bolt hole all the way across to the center of the other bolt hole and it's 4", which would be 4 lugs 4" bolt pattern. This wheel has a capacity of 1,650 pounds. It uses a wheel bolt size of 1/2"-20. Another critical measurement is the large pilot hole diameter. This hole is used to fit over the hub on your trailer.
On this wheel, the diameter will measure 2.5". Now we'll move on to the tire. This is a Kenda Loadstar 205/65-10 tire size. This is a load range B tire that has a 4 ply rating. It has a maximum load of 910 pounds at 35 psi.
This tire is of bias construction, which will mean the belts on the tire will run the length of the tire. This will give it a little bit from a ride as opposed to a radial constructed tire. This tire and wheel package will come with a limited 2-year warranty. And that should do it for part number AM3H330, the Kenda 205/65-10 bias trailer tire on a 10" Dexstar white spoke wheel.
In this video we are going to describe how to measure a trailer steel wheel. I have two examples here one is a 14 X 5-1/2, 5 on 4-1/2 bolt pattern steel wheel. This other one is a 16 X 6, 6 lug on 5 steel wheel, and the way to measure to know what size it is, on the diameter of the wheel, in other words what size tire will fit on this wheel is you want to measure from the inside to the inside where the bead seats and protrudes 60 inches. In other words thats the bead seat to the bead seat. You do not want to measure over all length from edge to edge, okay and to measure the width of the wheel. Again you will not want to measure, do not measure overall because it will show 7 inches incorrect.
