Today we are going to take a look at a bias ply trailer tire with wheel combo, part number AM3H480. The wheel is a white finish manufactured by Dexstar. It has a 10 inch diameter and measures 6 inches wide. It is built around a 5 on 4-1/2 inch bolt pattern. So you want to check the hub on your trail axle and make sure it is the same. The wheel and tire combo has a total load capacity of 1,650 pounds when the tire is inflated to its maximum pressure of 90 psi. The tire is a 205/65-10, load range E. And it is a bias ply construction, meaning the belts in the tire run the length of the tire and it results in a little bit firmer of a ride when compared to radial tire.
The whole combo is covered under a limited two year warranty. And thats it for our bias plus trailer tire and Real Combo part number AM3H480.
In this video we are going to describe how to measure a trailer steel wheel. I have two examples here one is a 14 X 5-1/2, 5 on 4-1/2 bolt pattern steel wheel. This other one is a 16 X 6, 6 lug on 5 steel wheel, and the way to measure to know what size it is, on the diameter of the wheel, in other words what size tire will fit on this wheel is you want to measure from the inside to the inside where the bead seats and protrudes 60 inches. In other words thats the bead seat to the bead seat. You do not want to measure over all length from edge to edge, okay and to measure the width of the wheel. Again you will not want to measure, do not measure overall because it will show 7 inches incorrect.