Today, we're going to review part number: AM3H290This is a Kenda 215/60 X 8 Bias Trailer Tire mounted on an 8" Dexstar White spoke Wheel. This wheel has a white, powder coat finish. A few dimensions on this wheel: This is an 8" diameter, which we'll measure inside to inside, which would be 8". It is a 7" wide wheel. The bolt pattern on this wheel is 4 lugs, 4" bolt pattern. And a way to measure the bolt pattern is if you go from the center of one lug directly across to the lug across from it, to the center of that would be 4".
This wheel has a weight capacity of 1,165 lbs., uses a wheel bolt size of 1/2" X 20". Another critical measurement is the large pilot hole diameter in the center of the wheel. This is what will go over the hub on your trailer. Wheel measurement on the diameter on that would be 2-1/2". Now, we'll move on to the tire: The tire is a Loadstar size 215/60/8.
It is a load range C tire, which means it is a 6-ply rated tire. This tire has a maximum load of 935 lbs at 50 psi. Overall diameter on this tire would be 18-1/2". This tire is of bias construction, which will mean the belts run the length of the tire.This tire wheel combo will come with a limited two-year warranty. And that should do it for part number: AM3H290.
.
In this video we are going to describe how to measure a trailer steel wheel. I have two examples here one is a 14 X 5-1/2, 5 on 4-1/2 bolt pattern steel wheel. This other one is a 16 X 6, 6 lug on 5 steel wheel, and the way to measure to know what size it is, on the diameter of the wheel, in other words what size tire will fit on this wheel is you want to measure from the inside to the inside where the bead seats and protrudes 60 inches. In other words thats the bead seat to the bead seat. You do not want to measure over all length from edge to edge, okay and to measure the width of the wheel. Again you will not want to measure, do not measure overall because it will show 7 inches incorrect.
