Today were going to review part number IMF1003745-77. These are the CargoBuckle G3 Retractable Ratcheting Tie-Downs with the angle mounting brackets. These heavy-duty retractable ratchet straps make it easy to secure your load when towing or hauling. They do tighten down quickly with the sure grip rubber-coated handle which makes it easy to grip and control with one hand. There is a push button release located right under the handle and when you push it; itll release the handle to move up and down. The ratchet also does have dual safety locks which are cut out on each side of the housing and which will allow you to put your handle in the lock position.
It also has a vinyl-coated steel S-hook which will help protect your cargo from any scratches. The ratchet does have a corrosion-resistant steel body. The strap is a seatbelt-quality polyester webbing. It is covered with a sturdy plastic housing and on the inside is a zinc-coated steel spring. The width of the strap is 1 inch length is 6 feet.
Does have a maximum load strength or breaking strength of 1400 pounds. The actual safe working load limit would be 1/3 of that, which is 466 pounds. This part number does come with a quantity of 2 ratchet straps, and the 2 angle mounting brackets, and the mounting hardware. The angle mounting brackets will allow you to permanently mount to your truck bred or trailer frame. It can be mounted on the wall or on the floor.
And what it will do is it will allow the ratchet to raise up at a 45-degree angle, which will make it easy to reach the handled ratchet, and it keeps the strap in a nice straight position. It does include the mounting hardware. And I just want to give an example of how the ratchet strap actually works. What you would do is pull up on the release and put the handle all the way in the upright position, thatll allow the strap to stand out. It does retract back automatically.
So once you would hook your S-hook to your tie-down point, it keeps tension on the line which will keep it over your cargo. When you push the release button, move the handle down to your ratchet position. That will allow you to ratchet up and tighten your strap around your cargo. One you get it tight, just pull up on the release, move it to the lock position and thatll lock everything in place, keep your cargo secure. When it comes time to remove your cargo, push the release and move the handle all the way upright position, thatll release the tension in the strap. Remove the S-hook from the tie-down point. Your strap will retract back into your housing. These parts do have a 1 year limited warrantee. And that should do it for part number IMF103745-77.