Today were going to review part number CE10400G. This is the CE Smith Spool Roll Assembly for boat trailers. This roll assembly will support your boats keel for easy loading and safe transport on your trailer. Features a four inch black rubber spool roller and a galvanized steel panel bracket with slotted mounting holes for adjustability. This assembly is typically installed upright on the front cross-member of a boat trailer. A spool roller panel bracket assembly will help to keep the boat moving while its being loaded and to stabilize the keel.
The spool roller supports your boats keel as it sits on the trailer. This will prevent the bow of your boat from making contact with your winch. It eases the loading and unloading of the boat and it helps absorb the road shock while the boats being trailered. The panel bracket lets you boat your roller assembly onto the front of your boat trailer. Has a slotted mounting holes that will allow you to adjust the position during installation.
And when this is being installed onto your trailer it does require the use of half inch or 7/16 inch fasteners and they are not included. The sturdy galvanized steel bracket will resist corrosion. The galvanized steel parts are hot dipped in a zinc coating after being stamped. This will create a coating that is typically three millimeters to five millimeters thick and this thick all around coating will allow the galvanized steel parts to provide years of use without rusting or corroding. It also has gussets here on each side, three on this side and three on this side and what that does is help provide extra strength by stiffening these bends of the bracket.
The black rubber roller will deliver long lasting performance. A few measurements on this, the roller length is four inches. It does ride on a shaft diameter of 5/8 of an inch. Now the dimensions on these mounting slots are going to be half inch wide, probably five inches long. The distance from the center of both mounting slots is two inches.
And just to give you a size on this bracket its going to be four and a half inches by six inches. And this part is made in the USA and that should do it for a review on part number CE10400G.
