Today were going to take a look at the Bulldog Round Snap-Ring swivel jack part #: BD151101. Bulldog covers this jack with a limited five year warranty and it features a lift capacity of 2,000lbs.It uses 2 inch diameter tubing. The inner tube and the welded footplate of the jack are zinc plated for maximum corrosion resistance. Its a side wind style jack with a nice ergonomic handle that makes the jack easy to operate. It will also swivel and fold up and out of the way, that way the jack is clear when youre trailering down the road. To do this youll pull on the handle releasing the pull pin and you can rotate the jack up and the pin will snap back into place.
Now well go over a couple of measurements. This jack is completely retracted and the bracket height from the center of the mounting bracket down to the bottom of the footplate is 11 inches. And we have another one of these jacks thats fully extended. If we take that same measurement again from the center of the bracket to the bottom of the footplate well get 21 inches fully extended. The difference between the two is 10 inches and thats known as the jacks lift or travel.
And thats it for the Bulldog Round Snap-Ring swivel jack part #: BD151101.