1996 Chevrolet Tahoe Nerf Bars - Running Boards

Features:

These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant powder coated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant chrome-plated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant powder coated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Features:

The aluminum bases of these step boards are covered in black molded polymer for sure footing. Each board sits close to your vehicle's frame for a streamlined look. Custom mounting kit included.

Installation Notes:

Drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Features:

These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

The aluminum bases of these step boards are covered in molded polymer for sure footing. Integrated light assemblies turn on when doors are open. Boards sit close to your vehicle's frame for a streamlined look. Custom mounting kit included.

Installation Notes:

Drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Features:

These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

The aluminum bases of these step boards are covered in molded polymer for sure footing. Integrated light assemblies turn on when doors are open. Boards sit close to your vehicle's frame for a streamlined look. Custom mounting kit included.

Installation Notes:

Drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Features:

These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.

Installation Notes:

No drilling required for installation

Features:

The aluminum bases of these step boards are covered in black molded polymer for sure footing. Each board sits close to your vehicle's frame for a streamlined look. Custom mounting kit included.

Installation Notes:

Drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Features:

These 3" round tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Black powder coat finish on the steel resists rust and corrosion. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

These 3" round tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Polished stainless steel tubes provide lasting durability. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of stainless steel with a polished finish that resists chipping, peeling, and fading. Custom installation with mounting kit.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts