Ultra-Fab Slide-Out Supports for Motor Homes - 21" to 37" - Qty 2
(156 reviews)
Price: $122.26
In Stock
Ultra-Fab Slide-Out Supports for Motor Homes - 21" to 37" - Qty 2
Item # UF19-960002
Our Price: $122.26
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (156)
- Q & A (0)
- Photos
Ultra-Fab Products Camper Jacks - UF19-960002
- Fifth Wheel Camper
- RV Motorhome
- Travel Trailer
- Stabilizer Jacks
- 1001 - 2000 lbs
- 2 Jacks
- 37 Inch Lift
- Ultra-Fab Products
- Not Mounted
- Steel
Keep your camper in tip-top shape with these slide-out supports. Extendable struts work in tandem to keep your slide out level and to prevent sagging and damage to your RV's extension tubes. Quick-release handles make mounting a snap.
Features:
- 2 Adjustable supports mount between the ground and the frame of your motor home's slide out
- Reduces slide-out sag
- Prevents damage to RV frame and extension tubes
- Quick-release handle for simple height adjustment
- Press button to release inner tube
- Pull tube up until U-channel bracket hits slide-out frame
- Turn handle to fine-tune
- U-Channel brackets straddle frame member for secure positioning
- Heavy-duty steel construction
Specs:
- Height: 21" - 37"
- U-Channel inside bracket width: 4-3/4"
- U-Channel outside bracket width: 5"
- U-Channel bracket height: 1-3/8"
- U-Channel front to back bracket length: 2-1/2"
- Quantity: 2 supports
- Combined weight capacity: 1,400 lbs
- Lifetime warranty
19-960002 UltraFab 21" - 37" Slideout Supports
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Ultra-Fab Slide-Out Supports for Motor Homes - 21" to 37" - Qty 2 - UF19-960002
Average Customer Rating: 4.8 out of 5 stars (156 Customer Reviews)
Keep your camper in tip-top shape with these slide-out supports. Extendable struts work in tandem to keep your slide out level and to prevent sagging and damage to your RV's extension tubes. Quick-release handles make mounting a snap.by: Charles10/13/2021
The Product appears to be what I need to add extra support to my toy haulers doors.
Not impressed with the shipping company, it was a miracle that the 2 items stayed inside of the box.
The attached picture shows you how they arrived today.
by: Thomas12/02/2017
I recently purchased a 1/5 wheel travel trailer with 5 slides. It was recommended that I should put slide supports under the bigger slides. After researching, I decided the Ultra-Fabs would do the job. I received them on Thursday and installed 2 sets that afternoon. I followed the guidelines and set them in less than 30 minutes. Friday afternoon I installed the rest. I know they did a good job because my wife's first comment was "the trailer doesn't bounce when you walk across the floor". That was the best test. She didn't know what I was doing under the trailer.
They were easy to install, 1 plastic leveling block, the support, and a short level.
Set the block under the slid rail at the outermost end, hold the support on it and pull the top up until it touches the rail. Holding the top against the rail with the ears on the sides of the rail. With 1 hand, push the white button and slide the lock ring down against the bottom housing and release the button. Plumb the bottom housing with the level. Give the lock ring 1 good turn after it is snug and you are finished.
by: Terry09/08/2018
This product has been just ok. The plastic tightening should not be made of plastic, they slip sometimes. Otherwise, the product works as intended. We live full time in our RV and these are consistently in use. We do appreciate the way the trailer feels when the slide out Jack's are in use, feels solid and eliminates 80% of the bounce as people walk around or grandkids jump. We would reccomend this product type to our friends. We love Etrailer and the ease of finding the products we are in search of.
by: Daren04/09/2015
I'm giving a 4 out of 5 because of a known manufacture defect. Some of them contain a nut that is defective and will not allow the gear to have pressure applied.
Etrailer to the rescue!! and they did :-)
I was very excited last weekend when I went out for the first time this year. Cleared a spot from the snow covered ground, placed a pad and then the support, pressed, lifted, two or three turns and done. LOVE IT. on to the next support, did the same thing but the support wouldn't stay up. Everytime I tried turning it it would skip back down. I looked around but couldn't find anything wrong.
I contacted etrailer.com once I got home and within an hour, they had contacted Ultra-Fab, sent me instructions on how to replace the defective part and I got an email the next day from UPS saying the item shipped!!!!!
Well done etrailer and Ultra-Fab..
I dropped 1 start because I think for the cost of a nut, Ultra-Fab should be sending them out to be shipped with the item instead of waiting to see which ones are failing.. not too big a deal, I am impressed with the quick response but more impressed with how quickly etrailer handled it all.
THANK YOU!
by: Keith04/03/2018
With my slides all on one side of the trailer these jacks keeps my trailer from leaning to one side also it helps sturdy my trailer in high winds. These jacks work great.
by: Chuck 03/06/2021
Glad to find these! Keeps our slideout nice & level & prevents sag. Keeps stress off of 3 inch bolt underneath slideout that had broken off previously before getting these supports
by: Clayton 07/15/2023
Perfect for my camper
by: Sunshine :)03/03/2017
I purchased my rv in 11/16 and found not having any suport for my slide out has really made my rv un stable to walk in and also sitting at my dinette or couch very wobbly. I just installed the 2 stabilizing jacks and WOW what a differance already!! :)
I am very glad I purcased these jacks for my rv.
Thank you etrailer.com. :)
S Eddy :)
by: John 04/20/2021
They do as advertised just wish they had the ability to lift up the slide to help level but you still need a jack to level and then set supports.
by: David 11/09/2022
Great product, just what was needed for an extended winter stay in a warm climate. Easy to install and solid support for heavy slide out.
by: Renee T.09/12/2016
Great product. We use these every time we camp. I like the fact that my slide out is secure and supported. It provide extra support for the entire trailer. Would highly recommend this product!!!
by: Gary S04/19/2017
Easy ordering... Fast delivery... The slide-out supports are well made/heavy duty, easy to use and the compact size is great for on board RV storage.
by: Dawn S06/16/2020
These are very good product. We live in an RV fulltime and these work really well to sta alize out slide out. Very much recommend and the price was great!
by: John B10/23/2022
Arrived faster than expected, packaging mangled but supports appear to be fine. Haven't had opportunity to use them yet but from reviews they should solidify camper slide. I'll do follow up review after I've had chance to use em.
by: Janet09/18/2014
Ordered these for our slideout to stabilize it as we leave it out for several months at a time. They arrived quickly and were super easy to install. Looks like an excellent product.
by: Michele07/31/2018
Tried them out this weekend and they were a great success!! They definitely help stabilized the slide outs and the trailer itself.
by: Scott11/01/2021
These are extremely durable and quick to install. We use them on a Lance 1575 slide out and they really stabilize the unit. Definitely a worthwhile investment.
by: Gary Kuta06/15/2015
Slide out supports were exactly as described, packaging was great and it was received 2 days earlier than expected.
by: Danny 04/01/2019
A must have to stabilize RV slide out. Very easy to use
by: Dennis05/08/2018
all items we bought were exact fit they work great and shipping was fast and service was great . warranty is good
by: dan grigor10/24/2015
They worked great to hold up the drum riser wing on my portable stage.
Unfortunately no shots from the back but look how rock steady the drums sit.
by: Terry05/21/2018
Just put the jacks on my trailer and they work great. I no longer see any sagging.
by: Nancy03/24/2018
Works great on my 5th wheel !
by: Chris M.06/20/2017
Adds stability to the trailer when the slide is out. These are really easy to adjust and get set up! A definite must if you have a slide!
25
155
Show More Reviews
See what our Experts say about this Ultra-Fab Products Camper Jacks
- Slide-Out Supports for 2013 Palomino Solar Ultra Lite Travel Trailer Frame BeamThe Ultra-Fab Slide-Out Supports for Motor Homes # UF19-960002 referenced in your question are designed to stabilize a motorhome slide-out by supporting their bottom frame rails. They are rated for this purpose so I cannot be sure if they will work properly in a different application. When used together, the two included slide-out supports have a total weight capacity of 1,400 pounds. The U-Channel inside bracket width is 4-3/4 inches with a front to back measurement of 2-1/2 inches....
view full answer... - Any Known Issues/Damage to Slide-Outs Due to Ultra Fab Slide Out Supports UF19-960002We haven't had any issues with slide out supports like the part # UF19-960002 causing any damage to an RV. If used properly it should prolong the life of the slide out and and not damage it. I attached a review video for this product for you to check out as well.
view full answer... - What are the Dimensions of the U-Shaped Support on the Ultra-Fab Slide-Out SupportsI went out to the warehouse and took some measurements of the top of the Ultra-Fab Slide-Out Supports, # UF19-960002. The inside width is 4-3/4 inches. The outside width is 5 inches. The height is 1-3/8 inches and the front to back measurement is 2-1/2 inches. I have included a picture showing some of these measurements for you.
view full answer...
- Availability of Supports for RV Slide Out When Slid OutYes we do. We have the Ultra-Fab Slide-Out Supports for Motor Homes - 26" to 47" - Qty 2 # UF19-960003 which will brace the slide out like you are wanting. The height range is 26 inch to 47 inch and we also have the shorter option # UF19-960002 which has a range of 21 to 37 inches.
view full answer... - Fitment of Slide Out Stabilizers on a RVGood news, I can help you understand why you would want these stabilizers for your RV. Stabilizers like the # UF19-960002, work to keep your slide out level, prevent sagging, and damage to your RV's extension tubes. They are designed to be used with your other stabilizers on your RV for an overall stabilization of the unit when parked. There shouldn't be any room for the stabilizer to have movement therefore no banging against parts if installed properly. If you are concerned about...
view full answer... - Do Slide Out Jacks Help on RVs with Slide OutsWhile some manufacturers will say that a slide out jack isn't needed we've found that they do make a noticeable improvement to overall stability when parked which means a more solid feel when walking around in the RV and also less chance of getting woken up at night due to movement. We have a few sizes that you'll have to measure your RV to determine which would work best. We have the part # UF19-960002 which is 21 inch to 37 inch, part # UF19-960001 which is 16 to 28 inch, and we have...
view full answer... - Slide Out Support For Travel TrailerThe first step to choosing the right slide out supports for your camper is to measure how high off the ground your slide outs are when your camper is on level ground. Slide out supports are adjustable to fit different heights, so even if you park on uneven ground, the supports will still fit under your camper as long as you choose your support with your level-ground height in the middle of the range. For weight capacity, the slide out support only has to support the weight of your slide...
view full answer... - How to Determine Correct Slide-Out Support For MotorhomeI believe you are referring to slide-out supports, and it's pretty simple to choose the right one. All you need to do is measure from the ground to the bottom of the slide out track to get the correct height; the photo below shows where you want to measure. Once you have that, just pick the correct height, and there are three to choose from: - 16" to 28": Ultra-Fab Slide-Out Supports # UF19-960001 - 21" to 37": Ultra-Fab Slide-Out Supports # UF19-960002 - 26" to 47": Ultra-Fab Slide-Out...
view full answer...
- Recommendation for 5th Wheel Trailer Slide-Out StabilizersUsing Ultra-Fab Slide-Out Supports, # UF19-960002, would be a good choice because they are adjustable from 21 to 37 inches which covers the range you have provided (26-1/2 on one and 30-1/2 on the other). If you wanted to put a leveler block underneath I recommend the Ultra-Fab levelers, # UF48-979051, because they are much more reliable than say a block of wood would be. I have included a link to a video review for you.
view full answer... - Recommended Products To Stabilize Grand Design Reflection Travel Trailer When CampingFor your Grand Design Reflection 312BHTS I recommend the Ultra-Fab Slide-Out Supports # UF19-960002. Since your Reflection has the 2 opposing slides that carry the weight of most the kitchen and the seating areas the trailer is virtually teetering on itself with the weight hanging over the sides of the trailer. These supports will allow you to stabilize that additional weight where it matters at the edge of the slide rather than at the frame which is inside the wheel footprint. Be sure...
view full answer... - Looking for Jacks to Stabilize a Slide Out on an Older Travel Trailer CamperTo support your slide out of your older camper, I recommend an Ultra-Fab Slide-Out Support instead of heavy duty jacks. The Ultra-Fab supports are sold in sets of two and come in three sizes depending on your trailers ground clearance when the slide out is extended. The difference in the three sets we have is the height. The # UF19-9600001 has a range from 16 to 28 inches, the # UF19-960002 has a range from 21 to 37 inches, and the # UF19-960003 has a range from 26 to 47 inches. All...
view full answer... - How To Support Slide-Out On 1998 Monaco DiplomatThe Ultra-Fab Slide-Out Supports for Motor Homes, # UF19-960003 that you linked to are adjustable supports that mount between the ground and the frame of slide out to reduce slide-out sag. This adjustment ranges in height from 26" to 47". This has a 4-3/4" inside measurement U-channel bracket that the RV's extension tubes rest against. This bracket straddles the frame member and tightens against it for secure positioning. The # UF19-960003 is a quantity of 2 each with combined weight capacity...
view full answer...
- Hitch Installation Support Jack for StabilityTo have a support, we normally use a second set of hands because that is the safest and easiest option. When another set of hands is not available, an option is to use the Ultra-Fab Slide-Out Supports for Motor Homes - 21" to 37" - Qty 2 # UF19-960002 to adjust the height of the hitch and support it. I recommend using straps like # IMF12637 to also secure the hitch to the supports if you use these supports.
view full answer... - Stabilizer Jack Setup for Hithhiker 5th WheelWe have the manual scissor jack set part # TJSCHD-24-4 which you'd install on the corners of the RV frame to level and stabilize the RV when parked. This will do a great job removing any movement an also has more than enough capacity for your 7,000 lb Hitchhiker. we also have slide out supports to help brace them as well with part # UF19-960002.
view full answer... - Operation and Sturdiness of Stromberg Carlson Camper Jack # JB-20 when Fully ExtendedI was able to go out to our warehouse and test out the strudiness of the Stromberg Camper Jack # JB-20, and check out the handle for you. I found that the handle does rotate down so that it won't stick out after you have set the height of the jack. I also found that they are very sturdy once the handle and nut are tightened to the base, even at the fully extended height. I have to tell you though, after spending the time to fully extend it and rotate the nut to the bottom, I had some...
view full answer... - Recommended Stabilizers for RV PatiosThe only supports we have for a patio or slide out are the slide out supports like the Ultra-Fab # UF19-960001 or # UF19-960002 if there is a frame rail. You could alternatively use a scissor stabilizer jack like # TJSC-24 or # JSC-30-IND. The only other option I can think of is to use the Brophy Cable Camper Jacks - 57" Max Lift Height - 3,000 lbs - Qty 2 # CJ41 as a stabilizer. The Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 # UF48-979004 would...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Halie H
Updated by:
Eric H
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thomas W.
12/2/2018
A year after installing the Ultra-Fabs, the only problem Ive encountered is the ground settling under the Ultra-Fabs. 1to2 turns on the lock rings cured the problem of them being loose. Ive recommended these Ultra-Fabs to many RVers Ive encountered over the past year.