2007 Jeep Wrangler Base Plates for Tow Bars

Base Plate Features:

Installation Notes:

Bumper fascia must be removed and replaced during installation

Requires some minor drilling

Requires some trimming of the belly pan

Use only with motorhome mount tow bars or the BX8833 or BX88151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 23" or greater spaced tabs. The Adventurer may only be used with baseplates that have 16" – 36" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs.

The BX88152 adapter can not be used with this baseplate

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Installation Notes:

Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.

Will not work with optional Mopar skid plate.

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

Will not work with optional Mopar skid plate.

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Drawbars are not removable.

Tech Tip: Fits vehicles with Rugged Ridge bumpers only, part numbers 11540-10 and 11540-11.

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Installation Notes:

Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.

This bracket fits Wranglers equipped with Warn/Mopar bumpers, must be part numbers 82211715, 82211715AB or 82209740AD & skid plate part numbers 82210401 or 82210401AB

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Installation Notes:

Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.

This bracket fits Wranglers equipped with Warn/Mopar bumpers, must be part numbers 82211715, 82211715AB or 82209740AD & skid plate part numbers 82210401 or 82210401AB

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

This bracket fits Wranglers equipped with Warn/Mopar bumpers, must be part numbers 82211715, 82211715AB or 82209740AD & skid plate part numbers 82210401 or 82210401AB

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

This bracket fits Wranglers equipped with Warn/Mopar bumpers, must be part numbers 82211715, 82211715AB or 82209740AD & skid plate part numbers 82210401 or 82210401AB