2004 Chevrolet Avalanche Base Plates for Tow Bars

Base Plate Features:

Installation Notes:

To the knowledge of Blue Ox, this vehicle may be towed without the addition of a drive shaft disconnect or lube pump. Please consult your owner's manual for towing instructions

Requires some trimming of bumper (fascia, plastic, and/or grill)

Requires some minor drilling

The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.

Specific dinghy towing restrictions apply. They may include specific towing speeds and distances, and/or lubricating the transmission and transfer case with the engine idling, then running selector through the gears. Other restrictions may also apply. Confirm the towability and pre-towing procedures of your vehicle with the owner's manual or contact the vehicle's manufacturer for specific towing procedures

The BX88152 adapter can not be used with this baseplate

Product will not work on models with brush guards

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Installation Notes:

Product will not work on models with brush guards

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

Product will not work on models with brush guards

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Installation Notes:

Product will not work on models with brush guards

Base Plate Features:

Fixed brackets provide a secure attachment point for your towbar.

Installation Notes:

To the knowledge of Blue Ox, this vehicle may be towed without the addition of a drive shaft disconnect or lube pump. Please consult your owner's manual for towing instructions

Requires some trimming of bumper (fascia, plastic, and/or grill)

Requires some minor drilling

The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.

Specific dinghy towing restrictions apply. They may include specific towing speeds and distances, and/or lubricating the transmission and transfer case with the engine idling, then running selector through the gears. Other restrictions may also apply. Confirm the towability and pre-towing procedures of your vehicle with the owner's manual or contact the vehicle's manufacturer for specific towing procedures

The BX88152 adapter can not be used with this baseplate

Product will not work on models with brush guards

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

Product will not work on models with brush guards