Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
On 2002 models only: need to check for sub-frame mounting bolts. These bolts are located under a splash panel behind the bumper. These bolts hold the engine cradle to the main frame. If these bolts are present use a 194 series bracket.
To the knowledge of Blue Ox, this vehicle may be towed without the addition of a drive shaft disconnect or lube pump. Please consult your owner's manual for towing instructions
Bumper fascia must be removed and replaced during installation
Requires some trimming of bumper (fascia, plastic, and/or grill)
Requires some minor drilling
Requires some trimming of the air dam
Use only with motorhome mount tow bars or the BX8833 or BX88151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 23" or greater spaced tabs. The Adventurer may only be used with baseplates that have 16" – 36" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs.
Specific dinghy towing restrictions apply. They may include specific towing speeds and distances, and/or lubricating the transmission and transfer case with the engine idling, then running selector through the gears. Other restrictions may also apply. Confirm the towability and pre-towing procedures of your vehicle with the owner's manual or contact the vehicle's manufacturer for specific towing procedures
The BX88152 adapter can not be used with this baseplate