Keep your truck riding in style with a fifth wheel tailgate! These tailgates offer ease of use and durability while improving the aerodynamics of your vehicle and adding clearance while towing a fifth wheel trailer. Perfect for fifth wheel towing or simply enhancing your truck's gas mileage, a custom-fit tailgate is a smart addition to any truck.
We offer custom fits for popular truck manufacturers like Ford, Chevy, Dodge, and GMC. Find the custom-fit application for your truck by entering the year, make, and model to the left.
What our customers are saying:
Excelent service. Placed order and recieved 2 days later. Would recommend to anybody. Thanks alot!
Keith
Medford, WI
Buffalo Tools Truck Bed Accessories BTBB07582 Review
Today were going to review part number BTBB07582. This is the Buffalo Tools Black Bull pickup truck crane with a hand winch. This heavy-duty crane will mount into your truck bed and let you safely and easily lift cargo and equipment into and out of your pickup. It has the four boom positions; one, two, three, four, and each one as you move that boom out it will reduce the weight capacity. Right now we have it in max which is 1,000 pounds so the closer this boom is to the base would be more weight capacity. The furthest out position with it extended fully out would be 500 pounds.
Buffalo Tools Truck Bed Accessories BTBB07583 Review
Today we're going to take a look at the Buffalo Tools Black Bull pickup truck crane, number BTBB07583. This is a truck-bed-mounted crane that lets you safely and easily lift cargo and equipment into and out of your pickup. It features two boom positions. Right now it's in the closest position. That allows you to support heavier loads. You would move this bolt here, pull it out, extend this out and then replace the bolt right here, and that would provide a longer range to lift more out of the way cargo.
Stromberg Carlson Tailgate Installation - 2006 Ford F-150
Today on our 2006 Ford F150, well be test fitting the Stromberg Carlson 100 series fifth wheel tailgate with open design, part number VG-04-100.Now to begin our test fit, we will first start off by removing our manufacturers tailgate. Well open up the tailgate and lay it down flat. Well then move to the support straps attached to the truck bed, lift up the silver plate to allow us to bring the strap up off of the hook. We will then repeat these steps for the other side. Note that you do need to keep a hold on the tailgate as once both straps have been removed, the tailgate will not have any support.Well then put the tailgate in a 45 degree angle and lift up on the passenger side of the tailgate. Once the passenger side is free, we can then slide the tailgate to the right and allow the drivers side of the tailgate to pop out.Now with the new hardware installed on the fifth wheel tailgate, well start off by inserting the rubber bushing on the drivers side of the truck bed.
DeeZee Tailgate Assist Installation - 2003 Ford F-250
Today on our 2003 Ford F250 Super Duty we'll be installing the DeeZee Tail Gate Assist, part number DZ43203. Our first step will be opening the tail gate. Next we'll go ahead and prepare and install the nutsert. Using the nutsert and nutsert tool we'll need to set the depth. There'll be 3/4 of an inch from the face of the washer at the end of the nutsert tool. Now we've got our depth set we'll go ahead and install it into the pre-drilled hole in the tail gate near the hinge.
Stromberg Carlson Tailgate Installation - 2007 Chevrolet Silverado
Today on this 2007 Chevrolet Silverado 2500 Series new body style; were going to do a test fit for part number, VGM-07-100. Were going to start off with our tailgate already removed and well go ahead and take the new tailgate and put it into place. First off, we are going to take the bushing that comings with the tailgate, install it on the pin on the driver side. Then well take the tailgate and slide it over that bushing and then we can go ahead and install the tailgate just like any other tailgate. Well go ahead and take the latch and well pull it in a little bit on each side and then push the tailgate into place until it snaps in. Inaudible 00:00:40 like your tailgate matches the contour of the bed by the taillight.
Stromberg Carlson Tailgate Installation - 2008 Ford F-350
Today on this 2008 Ford F350 were going to do a test fit of part number VG-97-4000. This is Strongberg Carlson 4000 Series fifth wheel louvered tailgate. This tailgate has a cut out for towing a fifth wheel or gooseneck trailer. It also constructed from a glass filled, black composite plastic frame and louvers. It also has a louver design that helps reduce drag. The tailgate is lockable.
Stromberg Carlson Tailgate Installation - 2002 Ford F-150
Today on this 2002 Ford F150 were going to do a test fit of part number VG-97-4000. This is Stromberg Carlson 4000 Series fifth wheel tailgate. Few things to know this tailgate has a cut out for a fifth wheel or a gooseneck trailer. Its constructed from a black composite plastic frame with built in louvers which allows for less drag and improves visibility. It also has a key center release mechanism that works with the latches. This will allow you to lock the tailgate on the truck.
Stromberg Carlson Tailgate Installation - 2012 Chevrolet Silverado
Today on this 2012 Chevrolet Silverado were going to do a test fit of part number VGM-07-4000. This is the Stromberg Carlson 4000 series fifth wheel levered tailgate. Well start off our test fit by removing the original tailgate and then well go ahead and install our new tailgate in the same fashion as the original one went in. Well start off on the drivers side. Well put it on the hinge, and then well go over to the passengers side and hold the tailgate at about a 45 degree angle and slide it on to the pin there. Next well go ahead and install the cables onto the original factory mounts.
Today on this 2012 Chevrolet Silverado, were going to do a test fit of part number VGM-07-100 from Stromberg Carlson. This is our 100 series fifth wheel tailgate, and has a convenient cutout for towing a fifth wheel or gooseneck hitch when youre hitching up. Well start off our test fit with the tailgate already removed from our truck, so lets go ahead and install our new tailgate in the same fashion the original tailgate would. Well start off by sliding the tailgate into the hinge onto the drives side, then well go over to the passengers side, line up the hinge, put the tailgate at about a 45 degree angle and slide it into place. Well go ahead and push it up until our latches meet the pins on the bed. Now well do one pin at a time.
