Features:
Strengthen the factory tailgate on your Jeep to handle an oversized spare tire. The frame and heavy-duty tailgate hinges reinforce the tailgate to support extra weight. Grease zerk on each hinge helps keep the tailgate operating smoothly.
More Information >Features:
Strengthen your factory tailgate on your Jeep to handle an oversized spare tire. Frame reinforces the tailgate to support extra weight. Works with factory and aftermarket spare tire carriers. Requires MORryde heavy-duty tailgate hinges to install.
More Information >Videos
for Jeep Spare Tire Carrier
Help Articles
for Jeep Spare Tire Carrier
Expert Answers
for Jeep Spare Tire Carrier
Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...You are correct that the Jeep bracket should have been reinstalled when installing the Blue Ox Base Plate #BX1139. I have linked another video near the bottom of the page where you can see the brackets being reinstalled on a 2020 Jeep Wrangler…
view full answer...The Lippert Flow Max RV Toilet #LC67AF requires a minimum of 12" for the rough-in.
view full answer...Yes, the Roadmaster Spare Tire Carrier #RM-195125 can pivot to the left or right depending on what kind off clearance you have. We only show to the left in the video because there is a ladder on the right side, but if you check out the attached…
view full answer...We do have some replacement wheels that you can see with parts #AM20783, #LHHA420, and #TA56FR if you're only needing the wheel. Since this is on a motorhome you're actually going to need to look into regular vehicle tires if you need…
view full answer...There are two possible options for you. The Dexstar Dual Wheel #AM20790 which is the 16" x 6" size you need with the 8 on 6-1/2" bolt pattern, uses flange nuts instead of standard lug nuts, and would work with the 225/75R16…
view full answer...We have a number of spare tire carriers available from Roadmaster, Demco, and other manufacturers; However, Blue Ox does not build an option. If you are needing a spare tire carrier for your 2017 Jayco Redhawk Motorhome, may I suggest the…
view full answer...It depends on what 5th wheel landing gear you have. For example; the Lippert Landing Gear part #LC333966 is rated for 6,000 lbs. It can be used with a trailer that weighs more than 6,000 lbs because it is only supporting part of that load - the…
view full answer...For the 6-point Level-Up System by Lippert, I made a call to the manufacturer to ensure you would receive correct information. Lippert said that when you bolt the footpads to the jacks, you need to torque them to 132 ft-lb. They said to make sure…
view full answer...We do have a few different options for you! If you are wanting an exact replacement then it looks like you currently have the Command LED Courtesy Light #328-002-04W. For a few different styles we have the Optronics #ILL85CB and #ILL86CB which are…
view full answer...In order to add a 7 way connector on you 2020 Jeep Wrangler JL you'll need to start by adding a 4 way trailer connector like the Tekonsha #118786, which gives you the connections needed to install a 7 way connector. Once you've…
view full answer...I went out to our warehouse and measured an outer bore diameter of 2-1/4 inches on the etrailer.com Trailer Idler Hub Assembly #AKIHUB-545-2-G-2K that you referenced. The reason we don't typically list this dimension on our trailer hubs is…
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN