Jeep Seats Specs:
Features:
Updating an aging factory seat or simply upgrading for the features, the TrailMax II Sport does it all. The high-back front bucket seat features a rotary dial for reclining, mesh map pockets and a built-in headrest.
Installation Notes:
Seat adapter bracket (B51256) is required; sold separately
More Information >Jeep Seats Specs:
Features:
Updating an aging factory seat or simply upgrading for the features, the TrailMax II Sport does it all. The high-back front bucket seat features a rotary dial for reclining, mesh map pockets and a built-in headrest.
Installation Notes:
Seat adapter bracket (B51256) is required; sold separately
More Information >Jeep Seats Specs:
Features:
Updating an aging factory seat or simply upgrading for the features, the TrailMax II Sport does it all. The high-back front bucket seat features a rotary dial for reclining, mesh map pockets and a built-in headrest.
Installation Notes:
Seat adapter bracket (B51256) is required; sold separately
More Information >Jeep Seats Specs:
Features:
Updating an aging factory seat or simply upgrading for the features, the TrailMax II Sport does it all. The high-back front bucket seat features a rotary dial for reclining, mesh map pockets and a built-in headrest.
Installation Notes:
Seat adapter bracket (B51256) is required; sold separately
More Information >Jeep Seats Specs:
Features:
Updating an aging factory seat or simply upgrading for the features, the TrailMax II Sport does it all. The high-back front bucket seat features a rotary dial for reclining, mesh map pockets and a built-in headrest.
Installation Notes:
Seat adapter bracket (B51256) is required; sold separately
More Information >Jeep Seats Specs:
Features:
Updating an aging factory seat or simply upgrading for the features, the TrailMax II Sport does it all. The high-back front bucket seat features a rotary dial for reclining, mesh map pockets and a built-in headrest.
Installation Notes:
Seat adapter bracket (B51256) is required; sold separately
More Information >Jeep Seats Specs:
Features:
Updating an aging factory seat or simply upgrading for the features, the TrailMax II Sport does it all. The high-back front bucket seat features a rotary dial for reclining, mesh map pockets and a built-in headrest.
Installation Notes:
Seat adapter bracket (B51256) is required; sold separately
More Information >Videos
for Jeep Seats
Help Articles
for Jeep Seats
Expert Answers
for Jeep Seats
I went out to the warehouse and measured seat #B3944137 which fits a CJ models from 1955 to 1995. These dimensions will be the same or nearly identical for all Jeep seat options. The seat portion of the seat is approximatel7 17 inches from the…
view full answer...I went ahead and got those dimensions for you from our warehouse. The Bestop TrailMax II Fold & Tumble - Vinyl Rear Bench #B3944015 measures 33-1/4" wide x 19" deep x 30-3/4" tall (with the headrests…
view full answer...The Bestop TrailMax II Sport #B3943837 that you referenced measures 20-1/2" wide, 35" high, and 21" from front to back. It fits the following vehicles: 1976 - 1986 Jeep CJ-7 1997 - 2006 Jeep TJ 1987 - 2003 Jeep…
view full answer...While I can't recommend trying to cook a burger on the Camco RV Portable Propane Campfire w/ Storage Bag, Regulator, and 8' Long Hose #CAM58041 it would be ideal for hot dogs and marshmallows for smores.
view full answer...The hub covers that I have are only available in chrome ABS finish. The Quick Trim Chrome Finish Trailer Hub Cover 6 on 5-1/2, part #QT655C, is a cover that will fit a 6 on 5-1/2 inch bolt pattern wheel. The Quick Trim Chrome Finish Trailer Hub…
view full answer...We have Jeep style trailer fenders but only for up to 15 inch wheels. We don't have any fenders for 17 inch wheels unless you are referring to the overall diameter of the tire versus the wheel/rim. I haven't seen any tear campers with…
view full answer...I went out in the warehouse and measured the etrailer Steel Trailer Fender, part #HP76VR. If you measured the width of the fender including the radius lip portion of the fender it is 10 inches wide everywhere. It is not narrower at the top. The…
view full answer...The Single Axle Trailer Fender #HP76VR that you referenced would work well on your ATV trailer, but these do not have a weight rating so I would not recommend you drive your ATV over them. There should be a way to load your ATV's without…
view full answer...I went out into our warehouse and measured an etrailer Trailer Fender #HP76VR and found that from the ground straight up to the midpoint of the radius it measures 17-3/4 inches and measured from where the leg touches the ground to the midpoint of…
view full answer...I spoke with my contact at Bestop who gave me the following dimensions for the Bestop TrailMax II Fold & Tumble #B3943915: Base: Length - 40-1/2" Depth - 20" Cushion Thickness - 5-1/4" Backrest: Indented Length -…
view full answer...The back section of the Bestop TrailMax II High Back Seat you mentioned, part #B3943615 that you referenced measures 22-1/2 inches without the headrests. With the headrests all the way up the overall height is 31 inches, with them pushed down as…
view full answer...The Magenetek Series 900 model 950 was a 50 amp converter so a great option to replace it and get a little more amperage would be the 60 amp Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9260C. This is a great unit…
view full answer...Filter Products (14)
Contact and Help
What our customers are saying:
Received already. Yeow! Perfect fit. Thanks for getting the kit to me so quickly.
Rich
Arlington, TX