Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The troubleshooting guide for the Hopkins Impulse trailer brake controller does not list an error code "OE" but if the unit displays a flashing code "SC" this indicates a short on the brake output circuit or a…
view full answer...What I recommend you do is use the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes #HLY84FR in conjunction with the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers #D210. This dual adapter will give…
view full answer...If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…
view full answer...From your photo, it looks like you have a Dexter axle, part number 51955. From my research, it appears this is likely a 3,500-lb axle. However, the weight capacity should be listed on the axle itself, so it would be best to confirm this before…
view full answer...I went to the warehouse and took a measurement of the Sidewind Handle for etrailer and Ram Square, Direct Weld Jacks, part #TJD-7000S-HD. The handle diameter is 1/2-inch. I have attached a photo of the handle with the dimension shown you can check…
view full answer...We do not offer torsion axles due to shipping size and weight restrictions. We do offer leaf spring beam axles up to a 3500-lb rating and we offer Timbren axle-less suspensions as well. If you want to add a second axle to an existing single-axle…
view full answer...We can get you the right shackle kit for your single axle trailer with a Dexter 3,500 lb axle, and you can choose from either a standard kit or an upgrade kit. Either will work, though the Upgrade Kit is going to be the best option due to the fact it…
view full answer...To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…
view full answer...The 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e46SR was designed to be used without bushings so it does not come with any. A mono leaf and a multi leaf pack don't have a performance difference that's notable. They both can and work…
view full answer...In theory a single leaf spring like the part #e46SR that you referenced is going to have a better ride quality since there isn't any inner leaf friction created by the individual leaves of a larger spring pack. Depending on if your current spring…
view full answer...The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Filter Your Search