13" Wide x 36" long x 20" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Includes handle.
Gooseneck coupler fits a 2-5/16" ball and has 8" of adjustment to fit your application. The curved internal ball clamp creates a tight fit for the hitch ball. A protected hidden spring latch is durable and easy to use.
These unique jacks extend from 11" to 17" and support up to 6,000 lbs each. Stackable design means that they take up less space when stored. For stabilizing only - do not use for lifting.
The hinged ball socket and pin fastener on this coupler ensure a secure connection every time. The flip latch pulls the collar back to open the ball socket. The black powder coat finish is corrosion resistant.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Topwind handle allows for an additional 15-1/2" of screw travel.
Compartment door trigger latch returns function to your interior compartment door by replacing 1 worn or damaged door trigger latch. Measures 4-1/4" long and 2" between mounting holes.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.
Experience greater driving stability and extend the life of your vehicle's coil springs with this suspension system. Coil enhancers absorb and dissipate shock from rough road conditions whether the vehicle is loaded or unloaded.
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. 7-way RV-style plug makes setup easy.
5-1/8" Diameter round. Low-profile dome light with 36 diodes illuminates a trailer's interior with bright light. Built-in switch controls power. Durable polycarbonate base and lens. Surface mount - hardware included. 2-Wire pigtail.
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows simple greasing. Sidewind crank included.
Use integrated switch or wire to a light switch to turn the double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.
The dual wheels on this jack run through mud or over gravel and sharp rocks without getting stuck or damaged. Easy-to-grip handle lets you drop the entire jack tube down for quick adjustment with minimal cranking. Great for everyday and off-road use.
This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. Extends 6" in 9.5 seconds with 1,000 lbs of tongue weight.
This rubber grommet allows you to recessed mount a 2-1/2" diameter sealed trailer light. Protects light against shock and vibration for extended life. Closed back design provides a seal to lock out moisture
This electric side-mount jack offers 14" of screw travel. Spring-loaded pull pin quickly releases the 8" drop leg. 3 LED lights allow easy setup at night. Sealed surfaces resist corrosion. Fits 3" to 5" trailer frames.
2-1/2" Diameter round. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Built-in reflex reflector. Multiple mounting options. Accepts standard 2-prong plug. P2 rated.
Rust-resistant jack is great for marine use. Square design offers superior side-load support. Retracted height is 7-1/4". Extended height is 22-5/8". Screw travel is 15-3/8". Drop leg offers an extra 13-3/4" of lift.
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features a 5-3/8" retracted height and measures 16" from the mounting bracket to the top, excluding the handle. Base sold separately.
Filter Results
