Select Your Vehicle

View Cart


Plug this 12V jack into your 7-way trailer connector for power and get quick, simple lifting. Corrosion-resistant, die-cast aluminum cap and hardened steel gears make for a long-lasting jack. Dual Features: Tongue jack positions quickly and easily 12V Motor powers jack, eliminating need for hand cranking Built-in, water-resistant toggle switch for easy operation Integrated circuit breaker

Style of Jack:
 A-Frame Jack

Classification of Jack:
 Powered Jack

Weight Capacity:
 3500 lbs

Application Style:
 Bolt-On
 Weld-On

Brand:
 Ultra-Fab Products

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2 Inch

$139.95
  (8)

Drop-leg, compact jack with heavy-duty footplate base welds directly onto your application and offers superior side-load strength in a tight-fitting package. Includes sidewind crank and has 25" Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side

Style of Jack:
 Side Frame Mount Jack

Type of Jack:
 Drop Leg Jack

Classification of Jack:
 Sidewind Jack

Weight Capacity:
 5000 lbs

Application Style:
 Weld-On

Brand:
 Bulldog

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2-1/2 Inch

$99.95
  (4)

This heavy-duty, round jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Has a 17-1/8" retracted height. tube and zinc inner tube Screw-nut stop prevents damage to screw and/or nut when jack is fully extended Sidewind handle has smooth, ergonomic design for easy cranking Drop leg increases overall extension

Style of Jack:
 Side Frame Mount Jack

Type of Jack:
 Fixed Leg Jack

Weight Capacity:
 2000 lbs

Brand:
 Bulldog

Includes Foot or Wheel:
 No Wheel or Foot

Outer Tube Width:
 2-1/4 Inch

$38.95

Features: Fits Bulldog Jacks rated at 10,000-lb lift, 12,000-lb support Rod diameter: 1-1/4" Includes screw and nut 500250 Bulldog Replacement Screw and Nut Assembly

 Trailer Jack

 Hardware

 Replacement Parts

 Screws and Nuts

 Bulldog

$58.95
  (3)

Weld-On 2" Diameter Pipe Mount Tube for Pipe Mounted Trailer Jacks Features: 2" Outer diameter Unfinished tube Welds to trailer for mounting jacks Made in the USA 22670 Weld-On 2" Diameter Pipe Mount Tube for Pipe Mounted Trailer Jacks

 Trailer Jack

 Mounting Brackets

 Replacement Parts

 Pipe Mount

 Dutton-Lainson

$9.49

Replaces manual crank handle for Atwood power jacks. Also fits Atwood 5th wheel landing leg direct drive assemblies with 4,000- and 5,000-lb capacities. Features: Replaces the manual handle for Atwood power jacks Also fits Atwood 5th wheel landing leg direct drive assemblies with 4,000- and 5,000-lb capacities Specs: Attachment end dimensions Inner

 Trailer Jack

 Handles and Cranks

 Replacement Parts

 Sidewind

 Atwood

$15.99
  (24)

Cover and screws fit Bulldog powered-drive camper jacks. Features: Designed to work with Bulldog Powered-Drive Camper Jack (BD500185) Includes bottom cover and screws 500192 Bulldog Bottom Cover and Screws for A-Frame Jack with Powered Drive

 Trailer Jack

 Covers

 Replacement Parts

 Bulldog

$20.95

Features: Fits Bulldog jacks with 12,000-lb capacity Designed for use with Bulldog series 182 jacks from 2003 to current Threaded portion measures 1-1/4 diameter Made in USA 500217 Bulldog Screw

 Trailer Jack

 Hardware

 Replacement Parts

 Screws and Nuts

 Bulldog

$49.95
  (12)

This heavy-duty, sturdy steel jack has easy-to-access grease fittings, a drop leg with spring return and an integrated screw stop to prevent damage to the screw and the nut. Sidewind crank sold over-extending jack Prevents damage to nut and screw Drop leg with spring return increases overall extension for maximum adjustability Heavy-duty steel offers superior strength and durability Painted inner

Style of Jack:
 Side Frame Mount Jack

Type of Jack:
 Drop Leg Jack

Classification of Jack:
 Sidewind Jack

Weight Capacity:
 12500 lbs

Application Style:
 Weld-On

Brand:
 Bulldog

Includes Foot or Wheel:
 With Foot

$174.95
  (11)

This heavy-duty, sturdy steel jack has easy-to-access grease fittings, a drop leg with spring return and an integrated screw stop to prevent damage to the screw and the nut. Offers 2 speeds for fast, from over-extending jack Prevents damage to nut and screw Drop leg with spring return increases overall extension for maximum adjustability Heavy-duty steel offers superior strength and durability

Style of Jack:
 Side Frame Mount Jack

Type of Jack:
 Drop Leg Jack

Classification of Jack:
 Sidewind Jack

Weight Capacity:
 12500 lbs

Application Style:
 Weld-On

Brand:
 Bulldog

Includes Foot or Wheel:
 With Foot

$299.95
  (7)

Replaces the gear assembly for Bulldog tandem landing gear. Includes 1 screw and nut assembly, retaining pins, washer, bearing bushing, and thrust bearing. Features: Replaces the gear assembly for Bulldog tandem landing gear Includes: 1 Screw and nut assembly 2 retaining pins 1 Washer 1 Bearing bushing 1 Thrust bearing. 5-Year limited warranty 500293

 Trailer Jack

 Gear Parts

 Replacement Parts

 Gears

 Bulldog

$71.95

This heavy-duty, square, drop-leg jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Welds directly onto trailer with no burn through and has 25-2/3" loading Durable, heavy-gauge construction lets you mount without burn through Weather-resistant coating on outer tube and zinc inner tube Screw-nut stop prevents damage to screw and/or nut when jack

Style of Jack:
 Side Frame Mount Jack

Type of Jack:
 Drop Leg Jack

Classification of Jack:
 Sidewind Jack

Weight Capacity:
 7200 lbs

Application Style:
 Weld-On

Brand:
 Bulldog

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 3 Inch

$141.95
  (6)

Replaces the Acme screw pin for Ultra-Fab powered jacks manufactured prior to 2010. Features: Replaces the Acme screw pin for Ultra-Fab powered tongue jacks manufactured before 2010 Ultra 3002 2" tongue jack - serial numers up to 10-012000 Ultra 3502 2" tongue jack -

 Trailer Jack

 Hardware

 Replacement Parts

 Pins

 Ultra-Fab Products

$4.12

Designed for use with Bulldog round, topwind swivel jacks with 5,000-lb capacity, this assembly includes the pull pin, chain and drive screw. Features: Pin holds swivel jack in position Designed for use with Bulldog series 150 and 170 topwind jacks Kit includes pull pin, chain and drive screw Specs: Pin diameter: 9/16" Overall pin

 Trailer Jack

 Hardware

 Replacement Parts

 Pins

 Bulldog

 9/16 Inch Pull Pin

$7.99
  (2)

Designed for use with Bulldog round, sidewind swivel jacks with 5,000-lb capacity, this assembly includes the pull pin, chain and drive screw. pin, chain and drive screw Made in USA Specs: Pin diameter: 5/8" Pin length: 3-1/2" 500231 Bulldog Pull Pin Kit for Sidewind Jacks - 5/8"

 Trailer Jack

 Hardware

 Replacement Parts

 Pins

 Bulldog

 5/8 Inch Pull Pin

$7.99

Powered jack features a ball-bearing screw system that reduces noise and wear and operates more efficiently than standard screw systems. Automatic stop prevents damage to gears. Front and side LEDs Features: Electric jack with powered drive lets you lift and lower your trailer quickly and easily Low-friction ball screw minimizes resistance to reduce wear, noise and heat Ball bearings roll

Style of Jack:
 A-Frame Jack

Classification of Jack:
 Powered Jack

Weight Capacity:
 4500 lbs

Application Style:
 Bolt-On

Brand:
 Husky

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2-1/4 Inch

$225.95
  (199)

Powered jack can be operated wirelessly with included remote. Ball-bearing screw system reduces noise and wear and operates more efficiently than standard screw systems. Automatic stop prevents the jack on and off and to raise it or lower it. Smooth, Low-Friction Operation Typical jack screw systems feature direct contact between the surfaces of the screw and the threaded nut. This constant contact

Style of Jack:
 A-Frame Jack

Classification of Jack:
 Powered Jack

Weight Capacity:
 4500 lbs

Application Style:
 Bolt-On

Brand:
 Husky

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2-1/4 Inch

$279.95
  (199)

This power jack uses a friction-reducing ball-bearing screw system for minimal wear. Foot automatically pivots up for clearance as you retract the jack and provides extra length when down for use. Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Power-efficient ball screw ensures a longer-lasting jack Ball bearings roll through threads - no direct

Style of Jack:
 A-Frame Jack

Classification of Jack:
 Powered Jack

Weight Capacity:
 3000 lbs

Application Style:
 Bolt-On

Brand:
 Atwood

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2-3/16 Inch

$199.95
  (19)

Powered jack features a ball-bearing screw system that reduces noise and wear and operates more efficiently than standard screw systems. Automatic stop prevents damage to gears. Front and side LEDs Features: Electric jack with powered drive lets you lift and lower your trailer quickly and easily Low-friction ball screw minimizes resistance to reduce wear, noise and heat Ball bearings roll

Style of Jack:
 A-Frame Jack

Classification of Jack:
 Powered Jack

Weight Capacity:
 3000 lbs

Application Style:
 Bolt-On

Brand:
 Husky

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2-1/4 Inch

$214.95
  (199)

This power jack uses a friction-reducing ball-bearing screw system for minimal wear. Foot automatically pivots up for clearance as you retract the jack and provides extra length when down for use. Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Power-efficient ball screw ensures a longer-lasting jack Ball bearings roll through threads - no direct

Style of Jack:
 A-Frame Jack

Classification of Jack:
 Powered Jack

Weight Capacity:
 4000 lbs

Application Style:
 Bolt-On

Brand:
 Atwood

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2-3/16 Inch

$249.95
  (19)

This power jack uses a friction-reducing ball-bearing screw system for minimal wear. Foot automatically pivots up for clearance as you retract the jack and provides extra length when down for use. Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Power-efficient ball screw ensures a longer-lasting jack Ball bearings roll through threads - no direct

Style of Jack:
 A-Frame Jack

Classification of Jack:
 Powered Jack

Weight Capacity:
 3000 lbs

Application Style:
 Bolt-On

Brand:
 Atwood

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2-3/16 Inch

$199.95
  (19)

This power jack uses a friction-reducing ball-bearing screw system for minimal wear. Foot automatically pivots up for clearance as you retract the jack and provides extra length when down for use. Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Power-efficient ball screw ensures a longer-lasting jack Ball bearings roll through threads - no direct

Style of Jack:
 A-Frame Jack

Classification of Jack:
 Powered Jack

Weight Capacity:
 4000 lbs

Application Style:
 Bolt-On

Brand:
 Atwood

Includes Foot or Wheel:
 With Foot

Outer Tube Width:
 2-3/16 Inch

$245.00
  (19)

Corrosion-resistant swivel jack is great for marine use. Bracket height is 27" when extended, 15" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. for saltwater applications Clear ZMax finish offers a 600-hour salt spray rating on internal components Acme screw raises and lowers the jack quickly and easily, traveling 1" for every 5 turns 360-Degree

Style of Jack:
 Side Frame Mount Jack

Type of Jack:
 Swivel Jack - Pull Pin

Classification of Jack:
 Sidewind Jack

Weight Capacity:
 1500 lbs

Application Style:
 Bolt-On

Brand:
 Fulton

Includes Foot or Wheel:
 With Wheel

Outer Tube Width:
 2-1/4 Inch

$121.95
  (11)

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. Features: Bolt on mounting Enclosed outer tube retards sand and dirt from contacting miter gears and heavy-duty Acme screw Fits channel tongues up to 3" wide x 5" tall All mounting

Style of Jack:
 Side Frame Mount Jack

Type of Jack:
 Swivel Jack - Pull Pin

Classification of Jack:
 Sidewind Jack

Weight Capacity:
 1200 lbs

Application Style:
 Bolt-On

Brand:
 Dutton-Lainson

Includes Foot or Wheel:
 With Wheel

$38.95
  (21)



< Previous    
1   2   3   










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com