Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I really like the Redarc Tow Pro Liberty part #RED52VR as it's proportional like you mentioned, is compatible with vehicles that have air brakes, and it only puts a small knob on the dash of the vehicle.
view full answer...To measure for a drop or rise you'll first need your tow vehicle and trailer to be on level ground with the trailer leveled as well. Then you'll measure from the ground to the top of the inside of the receiver on your 2021 Toyota…
view full answer...Some 1998 Ford F-150 and F-250 Light Duty Trucks have a factory installed connector and some do not. This depends on if you have a factory tow package or not. To figure out if your vehicle has a tow package, you can contact your local Ford Dealer and…
view full answer...The Badland winch 9k has a power draw of 300 amps at full load. You need a deep cycle 12V AGM battery that can handle that amperage. I recommend a battery with 650 Cold Cranking Amps (CCA). Badland Winches are an introductory winch with a not so…
view full answer...The Ford Replacement OEM Tow Package Wiring Harness, 7-Way #118242 will upgrade your factory 4-way connector to a 7-way. You will also want the mounting bracket #PK-12711U to position your 7-way connector in a convenient location and keep dirt and…
view full answer...I would be happy to help. The Tekonsha P3 brake controller you referenced would be an excellent choice for you. The P3 is extremely easy to use, and has controls that are intuitive and simple to understand. The diagnostic feature is unique in that…
view full answer...I only see one picture that you sent in and it shows an OBDII connector which is not what you need to connect to for a brake controller. The harness you need is the part #3050-P. The harness it plugs into will be located under the dash, to the left…
view full answer...Just to be accurate, when referring to tongue weight, it is the tongue weight of your loaded trailer plus the weight of the cargo that sits behind the rear axle of your vehicle. When measuring trailer TW the best way is to use a tongue weight scale…
view full answer...Thank you for all of the pictures. I do have a solution for you but when I reached out to my contact at Reese he said that you have the older SC weight distribution (WD) system and there aren't any replacement bars that will fit your application.…
view full answer...The Pilot Brake Controller #80550 will use the Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long #20127 and will connect red to cold side of brake light switch, white to ground, blue to electric brake…
view full answer...The Curt Spectrum #C51170 will light up from green to red (with the trailer connected) depending on what power setting you chose. This will be the case whether you are parked or heading down the road. I confirmed this with my contact at Curt.…
view full answer...No modifications need to be done to your 2004 Chevy Colorado in order to flat tow it behind a motor home. If using the tow dolly, #RM-2050-1, or another tow dolly, you will need to make sure that the dolly can accept the width of the truck and the…
view full answer...Related Searches
Filter Your Search