Replaces 1 single-acting angle cylinder on your Meyer snow plow. Angle cylinder helps angle your blade so you can easily clear the roads. Rod extends up to 26-1/4" so you can push snow easily off to the side.
4-1/4" Round. Weatherproof, incandescent trailer tail light serves as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. Recessed mount with included grommet and 3-wire plug.
Keep your furry family member safely in the rear of your vehicle with this adjustable pet barrier. Great for cars, SUVs, or minivans, it keeps your pet secure without limiting your visibility while driving. Easy install - no tools or drilling needed.
3-3/4" Round. Incandescent trailer light serves as a stop, tail, and turn signal light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.
Replaces 1 of the plow feet on your Meyer snow plow. Heavy-duty steel shoe attaches to the bottom of your blade to raise it up so that you can plow over uneven ground, gravel, grass, or dirt. Includes multiple washers to adjust its height.
4-1/8" Round. Incandescent trailer light functions as a stop, tail, and turn signal light. Durable black plastic housing and snap-on lens. Pedestal mount with included stud. 2-Wire design. (1) 2057 Bulb.
16-5/8" x 1" x 1-7/16". Incandescent identification light bar is designed for trailers wider than 80". Durable powder-coated white base. Surface mount to trailer - hardware not included. 1-Wire design. (3) 194 bulbs.
4-1/4" Round. Weatherproof, incandescent trailer light functions as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. Recessed or flange mount. Accepts 3-prong plug.
Stainless steel S-hooks and buckles give these transom (stern) tie-downs added protection against the elements - even in salt spray. Kwik-Lok buckles have one-hand operation and help maintain strap tension. Polypropylene webbing. 1,000 lbs Max load.
5-1/2" Diameter round. LED Trailer light serves 3 functions: stop, turn, and tail. Red lens offers traditional incandescent look. Flush mounts to trailer with built-in flange. Accepts standard 3-prong plug.
Replaces the brake pads on your Dexter saltwater rated disc brake caliper (089-135-00, 089-136-00, 089-235-00, 089-236-00, 089-013-00, 089-009-00, or 089-012-00). Includes enough brake pads for 1 axle.
3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.
These Pro Series ratchet tie-downs are a simple, effective way to secure your boat's stern to your trailer. Sturdy straps ratchet to tighten, and padded buckles and vinyl-coated hooks protect the boat's paint finish. 1,200 lbs Max load.
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.
2-1/2" Diameter round. Waterproof, LED trailer light functions as a clearance or side marker light. Pirhana series combines modern design with vibrant lighting. Recessed mount with grommet (not included). Accepts standard 2-prong plug. P2 rated.
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable stainless-steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.
2-1/2" Diameter round. Waterproof, LED trailer light functions as a clearance or side marker light. Pirhana series combines modern design with vibrant lighting. Recessed mount with grommet (not included). Accepts standard 2-prong plug. P2 rated.
4-1/4" Round. Weatherproof, LED trailer tail light serves 4 functions: brake, tail, turn, and backup light. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with included grommet and AMP-style plug.
This magnesium anode rod attracts corrosive elements in your RV's water heater, protecting your tank from corrosion. The 1/2" diameter x 4-1/2" long rod fits Atwood heaters.
4-1/4" Round. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.
Caliper is constructed of cast iron and plated with Dacromet for superior rust-resistant durability. Includes long-lasting, high-performance ceramic brake pads and an oversize, stainless steel piston for increased braking torque.
7" Diameter round LED transit tail light functions as a stop, tail, and turn signal light. Seal polycarbonate housing and lens. Hard-wired with (2) 0.180 male bullets for hot wire and ring terminal for ground. Surface mount.
Perfect for use with foldaway trailer tongues, this flexible hose functions as part of a hydraulic brake actuator system. Connect line to your actuator's master cylinder to route brake fluid to your trailer's brakes. Fittings included.
5-1/2" Round. LED trailer tail light with 7 diodes provides stop, tail, and turn signal functions. LumenX optics creates a solid panel of light. Integrated voltage regulation. Mounts on surface of trailer. Accepts AMP style plug.