Select Your Vehicle

View Cart

 Hitch Rise   x   >  

Filter Results

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise

$54.95
  (37)
1-1/4" shank is solid 2" shank is hollow Maximum tongue weight: 300 lbs Made in the USA Note: Tongue weight capacity of hitch will be reduced by 50% with use of adapter HT5R Brophy Trailer Hitch

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 Brophy

 7 Inch Long

 Steel

 Value

Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 6K GTW, 100 lbs TW

$56.95
  (96)
Make up for the height difference between your RV and towed vehicle with this hitch adapter. Provides either a 6" drop or a 6" rise. Hollow shank is lightweight. 2" hitch accessory Provides either drop or rise for adequate ground clearance Constructed of sturdy steel Hollow shank is lightweight Resists rust and corrosion with black powder coat finish Hitch pin

 Tow Bars

 High-Low Adapter

 Hitch Adapter

 Roadmaster

 6 Inch Rise/Drop

 Value

MaxxTow Dual Hitch Extender for 2" Trailer Hitches - 12" Long

$54.95
  (44)
Extend your trailer hitch receiver opening and get an extra receiver with the same piece. This dual hitch extension gives you (2) 2" receivers so you can tow a trailer and use an accessory is for hitch-mounted accessories only Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your

 Hitch Adapter

 Hitch Extender

 Fits 2 Inch Hitch

 MaxxTow

 12-1/4 Inch Long

 4000 lbs GTW

 Steel

 Value

MaxxTow Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" Hitch - 4-1/2" Rise

$39.95
  (67)
Adapter lets you use your 2" hitch-mounted accessories with your 1-1/4" x 1-1/4" trailer hitch receiver. 4-1/2" Rise gives extra ground clearance. Hitch pin and clip sold Features: Hitch adapter turns your 1-1/4" trailer hitch receiver into a 2" receiver so that you can mount a bike rack, cargo carrier, or other 2" hitch accessory Built-in rise

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 MaxxTow

 6-1/2 Inch Long

 Steel

 Economy

MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise - 5,000 lbs

$59.95
  (66)
Adjustable ball mount fits 2" trailer hitch receivers and provides up to a 10" drop or 8" rise to fit your application. Channel-style mount offers different height positions. lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Maximum drop: 10" Minimum drop: 5" Maximum rise: 8"

 Adjustable Ball Mount

 Class III

 5000 lbs GTW

 Drop - 10 Inch

 Rise - 8 Inch

 No Ball Mount

 Steel

 MaxxTow

 Extra Long

 Economy

High-Rise Pop-In Ball for Reese Elite Series Underbed Gooseneck Hitch - 1" Rise - 2-5/16"

$187.19
  (119)
Get an extra inch of height for your Reese Elite Series underbed gooseneck trailer hitch with this chrome-plated, high-rise ball. Pop-in ball functions the same way as your current Elite Series hitch warranty 19315 Reese Elite Series High Rise Pop-In Gooseneck Hitch Ball

 2-5/16 Inch Diameter Ball

 Gooseneck Ball

 Elite Pop-In Ball

 Reese

 Premium

Draw-Tite Class III Ball Mount with 2" Ball - 2-3/4" Rise, 4" Drop - 6,000 lbs

$24.48
  (13)
Towing starter kit includes 9" long, powder coated ball mount; 2" diameter, chrome-plated, pre-torqued hitch ball; and pin and clip. Slides into 2" square trailer hitches. Features: Starter kit has everything you need to tow, minus the hitch Ball mount provides drop or rise to fit your application Hitch ball comes torqued to factory specifications in drop position

 Fixed Ball Mount

 Class III

 6000 lbs GTW

 Drop - 4 Inch

 Rise - 3 Inch

 One Ball Mount

 Steel

 Draw-Tite

 Long

Ball Mount Class III 3/4" Rise or 2" Drop - Super Extra Long, 6,000 lbs

$29.95
  (163)
Trailer hitch ball mount features an angle cut, allowing it to slide easily into the receiver tube. the center of the hitch pin hole to the closest edge of the ball platform piece Provides 3/4" rise or 2" drop from the top of your hitch receiver tube Rated for up to 6,000 lbs GTW and up to 600 lbs

 Fixed Ball Mount

 Class III

 6000 lbs GTW

 Drop - 2 Inch

 Rise - 1 Inch

 No Ball Mount

 Steel

 Hidden Hitch

 Super Extra Long

Weigh Safe 2-Ball Mount w/ Built-In Scale - 2-1/2" Hitch - 6" Drop, 7" Rise - 14.5K

$299.00
  (20)
Measure your tongue weight to determine if you can safely tow by simply coupling your trailer to ball mount. Ball platform locks to shank and can be flipped to stow under your hitch. Includes to center of hitch ball: 8-3/4" Maximum drop: 6" Maximum rise: 7" Incremental height adjustment: 1" Scale capacity: 1,500 lbs Tics on gauge at 100-lb increments Scale gauge diameter:

 Adjustable Ball Mount

 Class V

 14500 lbs GTW

 Drop - 6 Inch

 Rise - 7 Inch

 Two Ball Mount

 Aluminum

 Weigh Safe

 Built-In TW Scale

 Standard

 Value

Curt Dual 2" Receiver Tube Adapter, 8" Extension

$71.95
  (14)
included Please Note: Using a hitch extender will reduce your hitch's overall capacity by 50% 45792 Curt Dual 2" Receiver Tube Adapter, 8" Extension

 Tow Bars

 Dual Hitch Adapter

 Extension

 Hitch Adapter

 Curt

 8 Inch Extension

Weigh Safe 2-Ball Mount w/ Built-In Scale - 2-1/2" Hitch - 10" Drop, 11" Rise - 14.5K

$309.00
  (28)
Measure your tongue weight to determine if you can safely tow by simply coupling your trailer to ball mount. Ball platform locks to shank and can be flipped to stow under your hitch. Includes to center of hitch ball: 8-3/4" Maximum drop: 10" Maximum rise: 11" Incremental height adjustment: 1" Scale capacity: 1,500 lbs Tics on gauge at 100-lb increments Scale gauge diameter:

 Adjustable Ball Mount

 Class V

 14500 lbs GTW

 Drop - 10 Inch

 Rise - 11 Inch

 Two Ball Mount

 Aluminum

 Weigh Safe

 Built-In TW Scale

 Standard

 Value

Weigh Safe 2-Ball Mount w/ Built-In Scale - 2" Hitch - 10" Drop, 11" Rise - 10K

$309.00
  (7)
Measure your tongue weight to determine if you can safely tow by simply coupling your trailer to ball mount. Ball platform locks to shank and can be flipped to stow under your hitch. Includes of hitch ball: 8-3/4" Maximum drop: 10" Maximum rise: 11" Incremental height adjustment: 1" Scale capacity: 1,500 lbs Tics on gauge at 100-lb increments Scale gauge diameter: 1-1/2"

 Adjustable Ball Mount

 Class IV

 10000 lbs GTW

 Drop - 10 Inch

 Rise - 11 Inch

 Two Ball Mount

 Aluminum

 Weigh Safe

 Built-In TW Scale

 Standard

 Value

2-5/16" Hitch Ball w/ 1" Rise - 1-1/4" Diameter x 2-5/8" Long Shank - Raw - 25K

$16.95
  (10)
2-5/8" Long x 1-1/4" diameter shank featuring a ball with a 1" high rise above the platform. Fine threads provide superior strength on this raw, machine-finished ball. Designed Features: Hitch ball provides connection point for your trailer's coupler High-rise design lets you easily match ball to trailer height Trailer hitch ball sits an extra inch above the ball mount

 2-5/16 Inch Diameter Ball

 Hitch Ball

 1-1/4 Inch Diameter Shank

 Standard Ball

 25000 lbs GTW

 Class V

 Raw

 Curt

Ball Mount 3/4" Rise or 2" Drop, Extra Long

$21.95
  (51)
hole to closest edge of ball platform: 8-1/2" Ball mount provides 3/4" rise or 2" drop from the top of your hitch's receiver tube Rated for up to 7,500 lbs and up to 750 lbs tongue weight 45260

 Fixed Ball Mount

 Class III

 7500 lbs GTW

 Drop - 2 Inch

 Rise - 1 Inch

 No Ball Mount

 Steel

 Curt

 Extra Long

Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Chrome Balls - 5-1/2" Drop, 6-1/2" Rise

$179.99
  (126)
Tow up to 8,000 lbs with supreme safety and the convenience of an adjustable 5-1/2" drop and 6-1/2" rise with the Rapid Hitch ball mount system. Includes chrome-plated steel ball combo using 2-1/2" to 2" adapter sleeve (sold separately) Ball diameters: 1-7/8" and 2" Towing capacity 7,500 lbs with 1-7/8" hitch ball 8,000 lbs with 2" hitch ball Maximum rise

 Adjustable Ball Mount

 Class IV

 8000 lbs GTW

 Drop - 5 Inch

 Rise - 6 Inch

 Two Ball Mount

 Aluminum

 Andersen

 Standard

 Long

 Economy

Curt Ball Mount with Sway Control Bracket, 3/4" Rise or 2" Drop

$25.95
  (29)
Ball mount with either a 3/4" rise or 2" drop comes with built-in bracket for sway control kit installation. Sway controls reduce side-to-side movement of trailer for better stability Features: Provides either 3/4" rise or 2" drop Has built-in bracket for easy installation of Sway Control Kit (sold separately) Specs: Fits 2" x 2" receiver hitch Requires ball

 Fixed Ball Mount

 Class III

 7500 lbs GTW

 Drop - 2 Inch

 Rise - 1 Inch

 No Ball Mount

 Steel

 Curt

 Standard

Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter by Bulldog, Draw-Tite and Reese

$699.95
Convert your Draw-Tite, Bulldog or B&W gooseneck hitch to a fifth-wheel hitch with this kit. Adapter has round and square gooseneck posts, a 4-way pivoting head for easy trailer hookup, Hitch Adapter Increase your towing versatility with this Hi-Rise adapter. The fifth-wheel hitch mounts in the ball hole of your existing underbed gooseneck hitch with included posts. Round and Square

 Gooseneck Hitch to Fifth Wheel Trailer

 Connects to Gooseneck Hole

 Draw-Tite

 Adapts Truck

 Hitch Adapters

 No Offset

 18000 lbs GTW

Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs

$17.95
  (75)
Corrosion-resistant ball mount is 9-5/8" long from the center of the hitch pin hole to the center of the ball mount hole and fits Class II 1-1/4" x 1-1/4" trailer hitch receivers. Ball method delivers smooth, clean surface Drawbar can be used in rise position only Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 1-1/4" x 1-1/4" trailer hitch

 Fixed Ball Mount

 Class II

 3500 lbs GTW

 Rise - 5 Inch

 No Ball Mount

 Steel

 Curt

 Long

Curt Forged Ball Mount for 2-1/2" Hitches - 1/2" Rise - 2" Drop - 20,000 lbs

$51.95
  (20)
Heavy-duty, 1-piece forged ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application. Solid, 1-piece forged steel construction Corrosion-resistant, carbide black powder coat finish Both drop and rise positions available to ensure level towing Hitch pin and clip or hitch lock sold separately

 Fixed Ball Mount

 Class V

 20000 lbs GTW

 Drop - 2 Inch

 Rise - 1/2 Inch

 No Ball Mount

 Steel

 Curt

 Standard

Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Chrome Balls - 10" Drop, 11" Rise

$199.99
  (126)
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 10" drop and 11" rise with the Rapid Hitch ball mount system. Includes chrome-plated steel ball combo (2" adapter sleeve (sold separately) Ball diameters: 2" and 2-5/16" Towing capacity 8,000 lbs GTW with 2" hitch ball 10,000 lbs GTW and 1,500 lbs TW with 2-5/16" hitch ball Maximum rise

 Adjustable Ball Mount

 Class IV

 10000 lbs GTW

 Drop - 10 Inch

 Two Ball Mount

 Aluminum

 Andersen

 Standard

 Value

EZ Heavy Duty Adjustable Hitch with Combo Ball - 8" Drop/Rise - 14,000 lbs

$179.99
  (60)
This all-steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball, 14,000 lbs with the 2-5/16" ball, and offers the convenience of a 8" drop or 8" rise. Fits Hitch balls secure to ball housing with included pin that allows for easy interchangeability Ball mount adjusts in 1" increments up to 8" drop and 8" rise with just a pull of the included

 Adjustable Ball Mount

 Class IV

 14000 lbs GTW

 Drop - 8 Inch

 Rise - 8 Inch

 Two Ball Mount

 Steel

 Andersen

 Standard

 Economy

MaxxTow Adjustable 2-Ball Mount - 2" Hitch - 6-1/4" Drop, 7-7/8" Rise - 12K

$79.95
  (25)
This all-steel, adjustable ball mount lets you tow up to 12,000 lbs with the convenience of a 6-1/4" drop or 7-7/8" rise. Channel-style mount includes 2" and 2-5/16" steel hitch of hitch pin hole to center of ball: 11-1/4" Weight capacity: 8,000 lbs GTW with 2" hitch ball 12,000 GTW with 2-5/16" hitch ball Tongue weight: 1,000 lbs Maximum rise: 7-7/8" from

 Adjustable Ball Mount

 Class IV

 12000 lbs GTW

 Drop - 6 Inch

 Rise - 8 Inch

 Two Ball Mount

 Steel

 MaxxTow

 Long

 Economy

Class II Drawbar 5-1/2" Rise or 6" Drop

$30.95
  (145)
Class II Hitch Drawbar / Ball mount 3" from center of pin hole to support gusset Provides 5-1/2" rise or 6" drop from top of your hitch's receiver tube Rated for up to 3,500 lbs gross trailer weight and up to 300 lbs tongue

 Fixed Ball Mount

 Class II

 3500 lbs GTW

 Drop - 6 Inch

 Rise - 5 Inch

 No Ball Mount

 Steel

 Brophy

 Standard

 Value

EZ Hitch Adjustable, Steel Ball Mount Kit w/ 2 Hitch Balls - 8" Drop or Rise - 10,000 lbs

$124.99
  (60)
This all-steel, adjustable ball mount lets you tow up to 10,000 lbs with the convenience of an 8" drop or 8" rise. Includes 2" and 2-5/16" steel hitch balls, and fits 2" Hitch balls secure to ball housing with included pin that allows for easy interchangeability Ball mount adjusts in 1" increments up to 8" drop and 8" rise with just a pull of the included

 Adjustable Ball Mount

 Class IV

 10000 lbs GTW

 Drop - 8 Inch

 Rise - 8 Inch

 Two Ball Mount

 Steel

 Andersen

 Long

 Economy




< Previous    
1   2   3    . . . 30







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com