Select Your Vehicle

View Cart


 Electric Brake Tester   x   >  

Filter Results

Replacement Tow Doctor Tester

Price:$200.54


  (1)
left turn, brake, tail, backup lights; electric brakes and auxiliary power Trailer lights illuminate and LED bulbs light on the tester to show function operation Adapts to 4-Flat, 6-Pole Round, or 7-Way

 Wiring

 Testers

 Hopkins

 

Engager Trailer BreakAway Kit with Charger and Tester

Price:$39.95


  (120)
Push button tester lets you know your break away system is ready to go. Box mounts on the side of the trailer tongue. System is designed to bring a trailer safely to a stop by activating its electric to bring trailers safely to a stop by activating electric brakes, should a trailer be disconnected while you are driving. This type of safety system is required in most states on trailers rated over 3,000

 Kit with Charger

 Hopkins

 

Engager Trailer BreakAway Kit with Charger and Tester with Top Mount Display

Price:$41.95


  (120)
The Breakaway system is designed to bring trailers safely to a stop by activating electric brakes, should a trailer be disconnected while you are driving. This type of safety system is required Features: Kit includes: Battery charger Weather resistant battery box Sealed 12-volt rechargeable battery Break-away switch LED tester shows if battery is good, bad, or charging Breakaway kit meets

 Kit with Charger

 Hopkins

 

Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Side Load

Price:$56.95


  (2)
A push-button tester with LED indicator lights makes it easy to know if this breakaway system's battery is fully charged so you'll have peace of mind while towing. The built-in charger with electric brakes and have a GTW of at least 3,000 lbs. 52042 Curt Side Load Push-to-Test Break Away System with Lockable Box

 Kit with Charger

 Curt

 

Hopkins Adapter 7-Pole to 6-Pole Universal with LED Tester - Electric Brake Center Pin

Price:$11.74


  (2)
Adapter converts your 7-pole plug on the vehicle to a 6-pole plug to fit your trailer's connector. = Right turn, green wire AX = Battery, black wire EB = Electric brakes, blue wire 47535 Adapter 7-Blade to 6-Pole Round - Universal with LED Tester - Electric Brake Center Pin

 Wiring Adapters

 Single-Function Adapter

 7 Round Pin

 6 Round

 Hopkins

 

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

Price:$65.84


  (700)
If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric trailer brake controller and 7-way connector. If there's not an existing 4-way flat on your Connector Wiring Diagram for Trailer Brake Controller Installation ETBC7 Universal Installation Kit for Electric Trailer Brake Control - 7-Way Blade and 4-Pole Flat - 10 Gauge Wires

 Brake Controller

 Wired to Brake Controller

 Brake Controller Wiring

 Wiring

 etrailer

 Universal

 

Curt Upgraded Circuit Protected Tail Light w Converter Hardwire Kit - 4 Pole End (Includes Tester)

Price:$48.93


  (268)
use Surface Mount Technology (SMT) is a method for constructing electrical circuits where components are mounted onto the surface of printed circuit boards. 56146 Curt Circuit Protected Powered

 4 Flat

 Curt

 Trailer Hitch Wiring

 Trailer Connectors

 Universal Fit

 Powered Converter

 Vehicle End Connector

 5 Feet Long

 

Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit - Includes Tester

Price:$62.91


  (80)
Tow Ready Circuit Protected ModuLite Vehicle Wiring Harness with Hardwire Kit (Includes tester) Features: Short circuit protection safeguards itself and the tow vehicle against harmful electrical

 4 Flat

 Tow Ready

 Trailer Hitch Wiring

 Trailer Connectors

 Universal Fit

 Powered Converter

 Vehicle End Connector

 

Replacement Sealed Lead Acid Battery for Shur-Set III Breakaway Kit and Tekonsha Circuit Tester

Price:$22.95


  (10)
Replaces a 12-volt, sealed lead acid battery for use with Shur-Set III breakway kits on single, tandem, and tri-axle trailers with electric brakes or replaces the internal battery for Tekonsha Features: Replaces a 12-volt, sealed lead acid battery for use with Shur-Set III breakway kits on single, tandem, and tri-axle trailers with electric brakes Also replaces the internal battery

 Trailer Breakaway Kit

 12V Battery

 Battery

 Tekonsha

 

Pro Series Push to Test Breakaway Kit with Premium Integrated Charger

Price:$36.95


  (16)
Breakaway system is designed to bring a trailer safely to a stop by activating its electric brakes should it be disconnected while towing. Push button tester lets you know your system is ready to go. Features: Breakaway system is designed to bring a trailer safely to a stop by activating its electric brakes should it be disconnected while towing Push to test: LEDs indicate fully charged,

 Kit with Charger

 Pro Series

 

Universal Brake Control Wiring Adapter for 1992-93 Ford Trucks

Price:$10.99


  (2)
to simplify the electric brake controller installation. The 4 wires on the adapter are butt-connected to the 4 wires coming out of the electric brake controller. The harness is then plugged into a port under

 Brake Controller

 Wired to Brake Controller

 Brake Controller Wiring

 Adapter

 Hopkins

 Vehicle Specific

 

Brake Controller 6 and 4 Way Installation Kit, 10 Gauge

Price:$67.94


  (3)
Includes all parts necessary to install an electric trailer brake controller in your vehicle. connector Replaces 39506 ETBC6 Brake Controller 6 and 4 Way Installation Kit, 10 Gauge ETBC6 Brake Controller 6 and 4 Way Installation Kit, 10 Gauge

 Brake Controller

 Wired to Brake Controller

 Brake Controller Wiring

 Wiring

 etrailer

 Universal

 

Hopkins Tow Doctor Trailer End Test Unit

Price:$304.95


  (4)
Features: Allows one person to check that trailer wiring and functions are working correctly Tests all trailer functions: right turn, left turn, brake, tail, backup lights; electric brakes

 Wiring

 Tools for Wiring

 Circuit Tester

 Testers

 Hopkins

 Circuit Tester

 

Upgraded Heavy Duty Modulite Circuit Protected Vehicle Wiring Harness with Install Kit

Price:$74.71


  (122)
This kit uses a powered converter with circuit protection to safeguard your vehicle and the module. Includes everything necessary to hardwire it to your vehicle. Capacity: 15.9 amps. and the tow vehicle against harmful electrical shorts and mis-wire situations Automatically self resets Virtually eliminates draw on the vehicle's taillight circuit Taillight circuit has been upgraded

 4 Flat

 Tow Ready

 Trailer Hitch Wiring

 Trailer Connectors

 Universal Fit

 2 Wire System

 3 Wire System

 Powered Converter

 Vehicle End Connector

 

Hopkins 7-Way RV Style Connector w/ Molded Cable and LED Test Lights - Trailer End - 6' Long

Price:$30.95


  (1)
The LED test lights on this molded, 7-way, RV-style, trailer-end connector confirm connectivity between your trailer and vehicle for simple troubleshooting. Durable cable covering resists damage. White: ground wire Red: left turn/brake light Brown: right turn/brake light Green: tail lights Yellow: reverse lights Blue: electric brakes Black: auxiliary power 90-Day limited warranty 20086 Hopkins

 Trailer Connectors

 Trailer End Connector

 7 Blade

 Hopkins

 6 Feet Long

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$74.95


  (41)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into your vehicle's existing wiring - no cutting or splicing required. in quickly and easily - no cutting or splicing of wires Connection points are located behind your vehicle's tail lights Helps safeguard the towed car's electrical system by preventing overload

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$46.95


  (7)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into your vehicle's existing wiring - no cutting or splicing required. in quickly and easily - no cutting or splicing of wires Connection points are located behind your vehicle's tail lights Helps safeguard the towed car's electrical system by preventing overload

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$74.95


  (8)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into existing wiring - no cutting or splicing. Operates as combined lighting system. interfere with electrical system when towed car is not hooked up to RV Custom designed for your vehicle Includes wiring harness, mounting bracket and 4-flat extension loop for hookup Brake light relay

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$74.95


  (6)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into existing wiring - no cutting or splicing. Operates as combined lighting system. tail lights Helps safeguard the towed car's electrical system by preventing overload with built-in diodes Additional diodes (sold separately) required to eliminate electrical feedback Won't

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$51.28


  (1)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into existing wiring - no cutting or splicing. Operates as combined lighting system. tail lights Helps safeguard the towed car's electrical system by preventing overload with built-in diodes Additional diodes (sold separately) required to eliminate electrical feedback Won't

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$74.95


  (4)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into existing wiring - no cutting or splicing. Operates as combined lighting system. tail lights Helps safeguard the towed car's electrical system by preventing overload with built-in diodes Additional diodes (sold separately) required to eliminate electrical feedback Won't

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$40.95


  (1)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into existing wiring - no cutting or splicing. Operates as combined lighting system. interfere with electrical system when towed car is not hooked up to RV Custom designed for your vehicle Includes wiring harness, mounting bracket and 4-flat extension loop for hookup Brake light relay

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$74.95


  (1)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into existing wiring - no cutting or splicing. Operates as combined lighting system. interfere with electrical system when towed car is not hooked up to RV Custom designed for your vehicle Includes wiring harness, mounting bracket and 4-flat extension loop for hookup Brake light relay

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 

TrailerMate Custom Tail Light Wiring Kit for Towed Vehicles

Price:$74.95


  (3)
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into existing wiring - no cutting or splicing. Operates as combined lighting system. tail lights Helps safeguard the towed car's electrical system by preventing overload with built-in diodes Additional diodes (sold separately) required to eliminate electrical feedback Won't

 Plugs into Vehicle Wiring

 Wiring Harness

 TrailerMate

 Tail Light Mount

 Custom

 




< Previous    
1   2   3   







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com