Select Your Vehicle

View Cart


 Class V Adapter   x   >  

Filter Results

Reese Titan Reducer Sleeve 2-1/2" to 2"

Price:$20.09


  (114)
Bushing reduces Titan Class V receiver opening (2-1/2" x 2-1/2") to a Class III or IV receiver opening (2" x 2"). Features: Adapts a 2-1/2" x 2-1/2" hitch receiver opening into a 2" x 2" Works with factory-installed and after-market trailer hitches with a 2-1/2" square receiver opening

 Hitch Adapter

 Hitch Reducer

 Fits 2-1/2 Inch Hitch

 2-1/2 Inch to 2 Inch

 Reese

 4 Inch Long

 Steel

 

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise

Price:$55.95


  (56)
Features: Convert any 1-1/4" (Class I and II) receiver to a 2" receiver (not to be used for towing or with snow plows) Powder coated black finish Extends 7" and raises 5-1/2"

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 Brophy

 7 Inch Long

 Steel

 

MaxxTow Dual Hitch Extender for 2" Trailer Hitches - 12" Long

Price:$54.95


  (70)
Extend your trailer hitch receiver opening and get an extra receiver with the same piece. This dual hitch extension gives you (2) 2" receivers so you can tow a trailer and use an accessory at the same time. Powder coated steel resists rust.

 Hitch Adapter

 Hitch Extender

 Fits 2 Inch Hitch

 MaxxTow

 12-1/4 Inch Long

 4000 lbs GTW

 Steel

 

MaxxTow Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" Hitch - 4-1/2" Rise

Price:$37.95


  (80)
Adapter lets you use your 2" hitch-mounted accessories with your 1-1/4" x 1-1/4" trailer hitch receiver. 4-1/2" Rise gives extra ground clearance. Hitch pin and clip sold Features: Hitch adapter turns your 1-1/4" trailer hitch receiver into a 2" receiver so that you can mount a bike rack, cargo carrier, or other 2" hitch accessory Built-in rise

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 MaxxTow

 6-1/2 Inch Long

 Steel

 

Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long

Price:$278.95


  (16)
Note: This product may not work on some OEM Class V hitches with rounded edges. Hitch Box Extension comes complete at 48" and is designed to be cut down to 41", depending on the application.

 Hitch Adapter

 Hitch Extender

 Hitch Reducer

 Fits 2-1/2 Inch Hitch

 2-1/2 Inch to 2 Inch

 Reese

 41 - 48 Inch

 Steel

 

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver

Price:$41.95


  (119)
Need to put a 2" bike rack or cargo carrier in your 1 1/4" hitch receiver? No worries. Simply insert this adapter and off you go. It cannot get any easier to use and is certainly less 5/8" pin for 2" receiver (PC3) Requires 1/2" pin for 1-1/4" receiver (PC2) Made in the USA HTAD Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 Brophy

 7-1/4 Inch Long

 Steel

 

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)

Price:$48.95


  (11)
Both 2" and 1-1/4" cargo carriers or bike racks can be used with your 1-1/4" hitch receiver with this adapter. Simple design makes it a snap to use. Much more economical solution than Features: Convert any Class II 1-1/4" receiver to a 2" receiver Will not fit Class I 1-1/4" receiver Has black painted finish Measures 6" long from pin hole to pin hole Maximum

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 Tow Ready

 6 Inch Long

 Steel

 

Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6-1/4" Long

Price:$27.95


Transform your 1-1/4" trailer hitch receiver (Class II only) into a 2" one with this adapter from Curt. It slides into your existing hitch receiver so you can easily carry a 2" bike to center of hitch pin hole Pin hole diameters: 1-1/4" Receiver: 1/2" 2" Receiver: 5/8" 1-Year limited warranty Note: Using this adapter will reduce your hitch's weight capacity by 50

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 Curt

 6-1/4 Inch Long

 Steel

 

20x47 MaxxTow Cargo Carrier for 2" Hitches - Aluminum - 500 lbs

Price:$114.95


  (45)
22x49 Outside dimensions. Extruded aluminum, basket-style cargo carrier is lightweight and rustproof. Raised side rails help keep cargo in place while also providing limitless tie-down options. Hitch pin and clip included. 47" long x 20-1/2" wide x 5" deep Distance from center of hitch pin hole to closest edge of carrier: 8-1/2" Carrier weight: 29 lbs 90-Day warranty 70108 Maxx Tow 22-1/2x49 Railed Hitch

 Flat Carrier

 Fits 2 Inch Hitch

 Fixed Carrier

 Class III

 Class IV

 Heavy Duty

 22 Inch Wide

 MaxxTow

 Aluminum

 

Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs

Price:$19.49


  (82)
Corrosion-resistant ball mount is 11-5/8" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only. Class II only Gross towing weight: 3,500 lbs Tongue weight: 350 lbs Ball hole diameter: 3/4" Length: 11-5/8" from center of hitch pin hole to center of ball hole Rise: 5" from top of inside

 Fixed Ball Mount

 Class II

 3500 lbs GTW

 Rise - 5 Inch

 No Ball

 Curt

 Steel Shank

 

Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs

Price:$44.95


  (84)
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight. 5/8" Pin and clip included Specs: Application: 2" x 2" receiver hitches Gross trailer weight: 7,500 lbs Tongue weight: 750 lbs Drop: 2-1/4" from top of vehicle's 2" hitch opening

 Fixed Ball Mount

 Class III

 7500 lbs GTW

 Drop - 2 Inch

 No Ball

 Curt

 Steel Shank

 Built-In Dual Hitch

 

Convert-A-Ball Cushioned Ball Mount for 2" Hitches - 2-3/4" Rise - 4" Drop -14K

Price:$83.95


  (6)
Heavy-duty, cushioned ball mount works as a shock absorber, measures 10" from pin hole to ball hole, and can be used in either the drop or rise position. Double-laminated steel construction makes it virtually stress-fracture proof. 1" thick Pin hole diameter: 5/8" 2-Year limited warranty Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning. This Convert-A-Ball ball mount meets or exceeds

 Fixed Ball Mount

 Class IV

 14000 lbs GTW

 Drop - 4 Inch

 Rise - 3 Inch

 No Ball

 Convert-A-Ball

 Steel Shank

 Cushioned Shank

 

Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Nickel

Price:$47.95


  (58)
Ball set with nickel-plated 1" diameter, 2-1/2" long shank. Three hitch balls with 1-7/8", 2" and 2-5/16" diameters. 10,000 lbs GTW. Corrosion and rust resistant. with different-size ball, reversing the process. This Convert-A-Ball interchangeable ball set exceeds THMA V-5 ratings in all categories and meets SAE standard J-684 . 900B Convert-A-Ball Nickel Plated 3 Ball Set -

 1-7/8 Inch Diameter Ball

 2 Inch Diameter Ball

 2-5/16 Inch Diameter Ball

 Hitch Ball

 1 Inch Diameter Shank

 Interchangeable Ball Set

 10000 lbs GTW

 Class III

 Nickel-Plated Steel

 Convert-A-Ball

 

Curt Upgraded Circuit Protected Tail Light w Converter Hardwire Kit - 4 Pole End (Includes Tester)

Price:$47.95


  (288)
Features: Adapts separate turn and stop lights (3-wire system) to a (2-wire system) on trailer Works with domestic and import vehicles Virtually eliminates draw on vehicle tail light circuit No HD

 Curt

 4 Flat

 Universal Fit

 Trailer Hitch Wiring

 Trailer Connectors

 Powered Converter

 Vehicle End Connector

 5 Feet Long

 

Convert-A-Ball Interchangeable Ball Set - 1-7/8" and 2" Balls - 1" Shank - Nickel

Price:$33.95


  (40)
Ball set with nickel-plated 1" diameter, 2-1/2" long shank. Two hitch balls with 1-7/8" and 2" diameters. 10,000 lbs GTW. Corrosion and rust resistant. with different-size ball, reversing the process. This Convert-A-Ball interchangeable ball set exceeds THMA V-5 ratings in all categories and meets SAE standard J-684 . 901B Convert-A-Ball Nickel Plated 2 Ball Set -

 1-7/8 Inch Diameter Ball

 2 Inch Diameter Ball

 Hitch Ball

 1 Inch Diameter Shank

 Interchangeable Ball Set

 10000 lbs GTW

 Class III

 Nickel-Plated Steel

 Convert-A-Ball

 

Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Stainless

Price:$79.95


  (66)
Ball set with stainless steel 1" diameter, 2-1/4" long shank. Three hitch balls with 1-7/8", 2" and 2-5/16" diameters. 10,000 lbs GTW. Superior corrosion resistance. This Convert-A-Ball interchangeable ball set exceeds THMA V-5 ratings in all categories and meets SAE standard J-684 . 902B Convert-A-Ball Stainless Steel 3 Ball Set - 1-7/8", 2" and 2-5/16" Diameter

 1-7/8 Inch Diameter Ball

 2 Inch Diameter Ball

 2-5/16 Inch Diameter Ball

 Hitch Ball

 1 Inch Diameter Shank

 Interchangeable Ball Set

 10000 lbs GTW

 Class III

 Stainless Steel

 Convert-A-Ball

 

Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" XL Shank - Nickel

Price:$49.95


  (16)
Ball set with nickel-plated 1" diameter, 3" long shank. Three hitch balls with 1-7/8", 2" and 2-5/16" diameters. 10,000 lbs GTW. Corrosion and rust resistant. and 2-5/16" Towing capacity: 10,000 lbs 2-Year limited warranty Changing your hitch ball size is as easy as pushing out the integrated pin. No need to get out the heavy wrenches. Convert-A-Ball's

 1-7/8 Inch Diameter Ball

 2 Inch Diameter Ball

 2-5/16 Inch Diameter Ball

 Hitch Ball

 1 Inch Diameter Shank

 Interchangeable Ball Set

 10000 lbs GTW

 Class III

 Nickel-Plated Steel

 Convert-A-Ball

 

Rhino-Rack 2500 Series Roof Rack with Euro Square Crossbars - 49" Long - Black

Price:$207.00


  (127)
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories. legs. Each leg comes equipped with an adapter to accept the square bars. And each channel includes a handy rubber ruler that can be cut to length to ensure that the crossbars are properly centered on your

 Rhino Rack

 Square Bars

 49 Inch Long

 Black

 Locks Included

 2 Bars

 Complete Roof Systems

 

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

Price:$68.95


  (8)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures

 Curt

 4 Flat

 Universal Fit

 2 Wire System

 3 Wire System

 Trailer Hitch Wiring

 Trailer Connectors

 Powered Converter

 Vehicle End Connector

 

Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs

Price:$109.95


  (15)
This ball mount is cushioned both vertically and horizontally, and you can move it up or down as needed to level your trailer. Simply pull out the pin to change heights. You can turn it over to use it in a rise position, too. Fits 2" hitches. limited warranty Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning. This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE

 Adjustable Ball Mount

 Class III

 5000 lbs GTW

 Drop - 9 Inch

 Rise - 7 Inch

 No Ball

 Convert-A-Ball

 Steel Shank

 Cushioned Shank

 

Folding Basket Adapter for 2" Trailer Hitch Mounted Cargo Carriers

Price:$65.95


  (30)
This adapter allows your cargo carrier to fold up and out of the way. With the adapter you will also increase the ground clearance between the carrier's platform and the ground to eliminate Measures 2-1/2" from the center of the hitch pin hole to the carrier railing when folded up Folding cargo carrier adapter designed for Surco Class III hitch mounted basket carrier item # 52018, but also

 Hitch Cargo Carrier

 Adapters

 Flat Carrier Parts

 Surco Products

 

Converter/Riser Mount for Advantage SportsRack V-Rack 2 Bike Carrier - 1-1/4" Hitches

Price:$22.47


Converter lets you use the V-Rack bike carrier (HE1011) with your vehicle's 1-1/4" hitch receiver. Steel unit slides into receiver, creating a base for the V-Rack to clamp on to. Also or hitch lock (sold separately) required to secure unit to receiver Specs: Fits: 1-1/4" x 1-1/4" (Class I and II) trailer hitch receivers Limited lifetime warranty Note: This adapter is only

 Hitch Bike Racks

 Shanks and Adapters

 Heininger Holdings

 

Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV

Price:$29.95


  (107)
Adapter bracket mounts to your Class III or Class IV ball mount to provide an attachment point for a friction-style sway-control system (sold separately). of ball hole to center of sway ball hole: 5-1/2" Limited lifetime warranty 26003 Reese Sway Control Adapter Bracket for Class III and Class IV 2" Ball Mounts

 Weight Distribution

 Adapters

 Sway Control Parts

 Reese

 

Derale Hyper-Cool Remote Engine Cooler Kit w/ Fan, -8 AN Inlets - Class V

Price:$294.95


  (5)
13" Wide x 10" tall x 5-5/8" deep, fan-mounted, remote cooler features the most efficient type of heat exchanger core, a stacked plate, and a 500-CFM, reversible tornado fan to ensure aluminum shroud for additional durability Mounts anywhere with aluminum mounting brackets Includes: Complete cooler assembly Universal thermostatic sandwich adapter and adapter plate provide external oil

 Stacked-Plate Cooler

 Class V

 With - 8 AN Inlets

 W/ Sandwich Adapter

 Derale

 




< Previous    
1   2   3    . . . 26




^