Select Your Vehicle

View Cart

 Brophy Tie Downs   x   >  

Filter Results

Camper Hold Down Black Powder Coated Finish (Qty 4)

$113.95
  (76)
Camper Hold Downs with Black Powder Coated Finish Quick, easy and secure installation, simply tighten two bolts No drilling required No projections into wheel well Extra wide clamp for exceptional

 Front and Rear Tie-Downs

 Brophy

 Steel

 Bed-Mounted

Angled Hold-Downs for Truck Bed Campers - Black Powder Coated Steel - Qty 4

$138.95
  (5)
Heavy-duty hold-downs provide anchor points for securing your camper to your truck bed. The angled design allows more clearance between hold-downs and truck fenders. Requires tie-down hardware (TDHP of the hold-downs requires a minimum of 2" of clearance between the inside of the truck's sidewall and the inner lip of the sidewall. HSAB Brophy Heavy-Duty Tie-Downs for Slide In Truck Camper - Black Powder

 Front and Rear Tie-Downs

 Brophy

 Steel

 Bed-Mounted

Camper Tie Down - Stake Pocket - Black

$70.95
  (54)
Brophy camper tie downs construction with straight fenders. Check your owner's manual for manufacturer restrictions on using stake pockets for camper tie downs. TDSF C.R. Brophy Camper Tie Down

 Front and Rear Tie-Downs

 Brophy

 Steel

 Bed-Mounted

Camper Hold Down Zinc Coated Finish (Qty 4)

$129.95
  (2)
Camper Hold Downs with Zinc Coated Finish Quick, easy and secure installation, simply tighten two bolts No drilling required No projections into wheel well Extra wide clamp for exceptional holding

 Front and Rear Tie-Downs

 Brophy

 Steel

 Bed-Mounted

Brophy D-Ring Tie Down Anchor - Bolt-On - 3-9/16" Wide - Recessed Mount - 400 lbs

$2.39
  (13)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 400 lbs. Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Recessed, low-profile

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 400 lbs

 Recessed Mount

 Economy

Brophy Light Duty D-Ring Tie-Down Anchor - 2-1/4" Wide - Surface Mount - 330 lbs

$0.95
  (36)
Light Duty Trailer Tie Down Lashing Ring Capacity: 1,000 lbs. Safe Working Load Limit: 330 lbs 1-1/2" D-Ring Note: Tie-down anchors must be chosen according to their safe working load limit

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 330 lbs

 Surface Mount - Bolt-On

 Economy

Brophy D-Ring Tie Down Anchor w Backing Plate and Hardware - Bolt-On - Surface Mount - 265 lbs

$7.99
  (1)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. Installs easily Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Surface-mount design

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 265 lbs

 Surface Mount - Bolt-On

 Value

Recessed Trailer D-Ring Tie Down with Backing Plate and Hardware, 5K

$13.99
  (113)
A complete tie-down kit with a 5,000 lb. recessed tie-down, backing plate for additional support, and bolts for installation. Features: Includes recessed tie-down, backing plate and bolts Made of zinc plated steel Specs: 5,000 capacity Bolt size: 3/8" x 2-1/4" RR5K C.R. Brophy Machine Works Mounting Kit

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 5000 lbs

 Backing Plate

 Value

Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs

$5.99
  (41)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 4,000 lbs. Features: 1/2" Ring diameter Measures 2-1/2" x 2-3/8" inner diameter with 2" hole Capacity: 4,000 working load limit (WLL); 11,700 maximum breaking strength (MBS) Note: Tie-down

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 4000 lbs

 Surface Mount - Bolt-On

 Value

Camper Tie Down Hardware Package

$28.95
  (62)
For use with camper tie downs (#HSSF) Includes: (4) 3/8" Turn buckles (4) S-hooks (4) Chains Max weight capacity: 3,000 lbs

 Turnbuckles

 Brophy

 Steel

 Bed-Mounted

 Locks Not Included

 No Tension Indicators

Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs

$1.99
  (69)
Medium Duty Trailer Tie Down Lashing Ring Steel with a zinc finish Capacity: 5,000 lbs Safe Working Load Limit: 1,600 lbs Diameter of mounting holes: 7/16" x 7/16" Note: Tie-down anchors

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 1600 lbs

 Surface Mount - Bolt-On

 Economy

Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs

$7.99
  (23)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 1,600 lbs. for corrosion resistance Specs: Quantity: 1 Tie down anchor Maximum load (break strength): 5,000 lbs Safe working load limit (WLL): 1,600 lbs. Note: Tie-down anchors must be chosen according to their safe working

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 1600 lbs

 Recessed Mount

 Value

Brophy Swiveling D-Ring Tie Down Anchor - Bolt-On - 6-5/16" Wide - Recessed Mount - 2,000 lbs

$10.49
  (15)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 2,000 lbs. Utility Trailer D-Ring Tie Down Recessed Ring Swivels 360 Degrees Zinc Plated Bolt-On Design Capacity: 6,000 lbs. Safe Working Load Limit: 2,000 lbs. 4 bolt holes are 3-13/16" apart Bolt holes

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 2000 lbs

 Recessed Mount

 Value

Brophy Swiveling D-Ring Anchor w Backing Plate and Hardware - Bolt-On - Recessed Mount - 2,000 lbs

$16.95
  (9)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed D-ring swivels 360 degrees for versatile tie-down positioning. Installs easily with the included Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 2000 lbs

 Recessed Mount

 Value

Turn Buckle for Camper Tie Down

$3.41
  (1)
Features: For use with camper tiedowns Size: 3/8" Zinc plated Quantity: 1 turn buckle TB38 Brophy Turn Buckle for Camper Tie Down

 Camper Tie-Downs

 Turnbuckles

 Brophy

Brophy Rope Ring Tie-Down Anchor w Plastic Pan - Bolt-On - Surface Mount - Zinc - 1,000 lbs

$3.27
  (1)
Install this 1/4" thick anchor ring in your trailer or truck bed or anywhere else you use tie-downs. Its plastic bezel pan bolts onto any surface (hardware not included). Rust-resistant zinc RR09 Brophy Zinc Bolt On Tie-Down Ring - 1/4" Thick

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 1000 lbs

 Surface Mount - Bolt-On

 Economy

Brophy Rope D-Ring Tie-Down Anchor - Bolt-On - 2-1/4" Wide - Surface Mount - 1,600 lbs

$6.59
  (1)
This sturdy D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The stainless steel ring resists corrosion and bolts onto a flat surface. Includes with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs. SS15-C Brophy Stainless

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 1600 lbs

 Surface Mount - Bolt-On

 Value

Camper Hold Down Clamp - Chrome Plated ( Qty 4)

$214.95
C.R. Brophy Super Heavy-Duty Camper Hold Down Clamp - Chrome Plated Polished chrome plate finish Quantity: 4 No drilling required Quick, easy and secure installation Only 1 bolt on each clamp

 Front and Rear Tie-Downs

 Brophy

 Steel

 Bed-Mounted

D-Ring Anchor w/ Backing Plate and Hardware - Bolt-On - Recessed or Surface Mount - 265 lbs

$7.99
  (5)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Mount D-ring to surface of bed or remove the plastic gasket for recessed mount. Installs easily Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 2 Mounting options

 Tie Down Anchors

 Trailer Tie Downs

 D-Ring

 Brophy

 265 lbs

 Recessed Mount

 Surface Mount - Bolt-On

 Value

Stake Pocket Tie-Down Anchor for Flatbed Truck or Trailer - Zinc - 1-3/8 " D-ring - 5K

$18.49
Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. For loads up to 5,000 lbs. of the mounting plate to the top of the pin hole Quantity: 1 stake pocket tie-down 1-Year warranty T35Z Brophy 3-1/2 Inch Anchor for Two-by-Four Trailer Stake Pockets - Zinc - 5,000 Pounds

 Tie Down Anchors

 Trailer Tie Downs

 Stake Pocket Application

 Stake Pockets

 No-Drill Application

 Brophy

 5000 lbs

 Value

Stake Pocket Tie-Down Anchor for Flatbed Truck or Trailer - Powder Coat - 1-3/8" D-ring - 5K

$17.95
  (11)
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. For loads up to 5,000 lbs. of the mounting plate to the top of the pin hole Quantity: 1 stake pocket tie-down 1-Year warranty T355 Brophy 3-1/2 Inch Anchor for Two-by-Four Trailer Stake Pockets - Black Powder Coat - 5,000 Pounds

 Tie Down Anchors

 Trailer Tie Downs

 Stake Pocket Application

 Stake Pockets

 No-Drill Application

 Brophy

 5000 lbs

 Value

Pack'Em Wheel Tie-Down Kit for Transporting Machines w/ Wheels - 30" Tall Tires - 2,000 lbs

$32.95
  (14)
You can keep ATVs, construction equipment, mowers and more from rolling during transport when you secure them with this easy-to-use wheel tie-down kit. The two steel stops and polyester strap hold Features: Wheel tie-down kit prevents any wheeled machine - such as an ATV or equipment for landscaping or construction - from rolling during transport 2 Steel stops act as chocks on either side

 Tie Down Strap

 Car Tie Down

 Ratchet Strap

 Packem

 800 lbs

 Value

Erickson Heavy-Duty Bull Ring Retractable Anchor (2 Pack) - 1,000 lbs

$24.95
  (125)
For your Chevy, GMC, Dodge, Ford F-Series or Toyota Tundra, these retractable anchors snap up and down for ease of use. They install quickly and easily into your truck's stake pockets Features: Bull rings provide accessible points for anchoring Retractable design lets you easily snap rings up or down Stainless steel anchors are durable and long lasting Quick and easy installation

 Tie Down Anchors

 Stake Pocket Application

 No-Drill Application

 Erickson

 1000 lbs

Stake Pocket Tie-Down Anchor for Flatbed Truck or Trailer - Powder Coat - 2" D-ring - 5K

$19.95
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. For loads up to 5,000 lbs. of the mounting plate to the top of the pin hole Quantity: 1 stake pocket tie-down 1-Year warranty T55B Brophy 3-1/2 Inch Anchor for Two-by-Four Trailer Stake Pockets - Black Powder Coat - 5,000 Pounds

 Tie Down Anchors

 Trailer Tie Downs

 Stake Pocket Application

 Stake Pockets

 No-Drill Application

 Brophy

 5000 lbs

 5-1/4 Inch Deep

 Value




< Previous    
1   2   3    . . . 6133







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com