Select Your Vehicle

View Cart


Replace your roller or V-block with this automatic attachment system. Drive your boat onto your trailer until the bow eye contacts the Boat Buddy, where a stainless steel bolt is triggered to shoot Boat Buddy, 1 plated steel bolt with locknut, 2 washers, 4 spacers and (1) 3/8" bow eye Included bow eye needs to be installed if the OEM bow eye does not fit in the 3/4" gap Made in USA Specs:

Style of Boat Trailer Part:
 Latch System

Brand:
 Kodiak

$74.95
  (65)

Replace your roller or V-block with this automatic attachment system. Drive your boat onto your trailer until the bow eye contacts the Boat Buddy, where a stainless steel bolt is triggered to shoot Boat Buddy, 1 plated steel bolt with locknut, 2 washers, 4 spacers and (1) 1/2" bow eye Made in USA Specs: Bow-eye U-bolt diameter: 1/2" Fits: most boats 21' and over Weight capacity: 5,000

Style of Boat Trailer Part:
 Latch System

Brand:
 Kodiak

$99.95
  (65)

Features: Replacement rubber shroud Fits Kodiak Boat Buddy with 1/2" bow tie B-6 Kodiak Replacement Rubber Shroud for Boat Buddy

 Boat Trailer Parts

 Hardware

 Replacement Parts

 Latch System

 Kodiak

$28.95
  (7)

Great for marine applications; the stainless steel construction provides the best in corrosion resistance. The design makes Bearing Buddy an easy way to protect your bearings by keeping water out spring-loaded piston outward 1/8". The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering

Cap Style:
 Bearing Protector

Outer Diameter:
 1.98 Inch

Brand:
 Bearing Buddy

Construction:
 Stainless Steel

Type of Bearing Protector:
 Non-Threaded

$26.95
  (155)

Four of these clamps enable you to mount 1-1/2" square tubing on the top or bottom of an I-beam on your aluminum boat trailer or a boat lift. Its galvanized steel construction resists corrosion. Features: Heavy-duty clamp secures 1-1/2" square tubing to an I-beam 4 Clamps (each sold separately) are required for (1) I-beam Galvanized steel construction is sturdy and resists corrosion

Style of Boat Trailer Part:
 I-Beam Clamp

Brand:
 CE Smith

$2.85
  (3)

These clamps enable you to mount 1-1/2" square tubing on the top or bottom of an I-beam on your boat trailer or a boat lift. Its galvanized steel construction resists rust and corrosion. Features: Heavy-duty clamps secure 1-1/2" square tubing to an I-beam 2 Sets are required for each I-beam - 1 clamp per end Galvanized steel construction is sturdy and resists corrosion Made

Style of Boat Trailer Part:
 I-Beam Clamp

Brand:
 CE Smith

$28.95
  (3)

Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal Features: Kit includes One inner bearing and race One outer bearing and race Grease seal Cotter pin - for standard spindle applications Tang washer - for EZ-Lube spindle applications Outer Bearing

Product Type:
 Bearing Kit

Typical Application:
 3500 lbs Axle

Bearing Number:
 Bearing L44649
 Bearing L68149

Race Number:
 Race L68111
 Race L44610

Brand:
 TruRyde

$11.98
  (379)

Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control outward 1/8". The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel

Cap Style:
 Bearing Protector

Outer Diameter:
 1.781 Inch

Brand:
 Bearing Buddy

Construction:
 Chrome Plated

Type of Bearing Protector:
 Non-Threaded

$19.95
  (17)

Provide your trailer bearings with premium protection - replace your existing grease caps with Bearing Buddies. They provide an easy way to control the grease volume in your axle hub and have blue the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8". The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior

Cap Style:
 Bearing Protector

Outer Diameter:
 1.98 Inch

Brand:
 Bearing Buddy

Construction:
 Chrome Plated

Type of Bearing Protector:
 Non-Threaded

$21.95
  (81)

Trailer hub assembly includes lug nuts, inner bearing (L44643) and race, outer bearing (L44643) and race, grease cap and grease seal. Fits 2,000-lb axles. Inner diameter: 1.249" Grease cap: 1.986" outer diameter Capacity: 1,250 lbs Dexter 8-91A should be stamped on back of hub Note: Some axles rated at 2,000 lbs require a different seal

Hub Style:
 Hub

Bolt Pattern:
 4 on 4 Inch

Inner Bearing:
 L44643

Outer Bearing:
 L44643

Axle Capacity:
 For 2000 lbs Axles

Hub Type:
 Standard

Wheel Size Compatibility:
 10 Inch
 12 Inch
 13 Inch

Brand:
 Dexter

$24.95
  (92)

Kit Includes: One Inner Bearing and Race One Outer Bearing and Race Grease Seal Cotter Pin EZ Lube spindle washer Fits spindles that use 1.063 ID inner and outer bearings Outer Bearing Inner Bearing

Product Type:
 Bearing Kit

Typical Application:
 3500 lbs Axle

Bearing Number:
 Bearing L44649

Brand:
 TruRyde

$9.95
  (132)

Great for marine applications; the stainless steel construction provides the best in corrosion resistance. The design makes Bearing Buddy an easy way to protect your bearings by keeping water out to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8". The O-ring inside the barrel of the Bearing Buddy maintains a seal from

Cap Style:
 Bearing Protector

Outer Diameter:
 2.441 Inch

Brand:
 Bearing Buddy

Construction:
 Stainless Steel

Type of Bearing Protector:
 Non-Threaded

$39.95
  (20)

Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8". The O-ring inside the barrel of the Bearing Buddy

Cap Style:
 Bearing Protector

Outer Diameter:
 2.441 Inch

Brand:
 Bearing Buddy

Construction:
 Chrome Plated

Type of Bearing Protector:
 Non-Threaded

$29.95
  (34)

Trailer Hub Grease Seal Single Lip Seal For double lip seal see # 10-60 I.D. O.D. Use With: 1.500 1.987 BTR Spindles Seal Cross-Reference Dexter # Transcom # National # NOK # Chicago Rawhide #

Product Type:
 Grease Seal

Inner Diameter:
 1.500 Inch I.D.

Outer Diameter:
 1.987 Inch O.D

Brand:
 TruRyde

$2.49
  (27)

Great for marine applications; the stainless steel construction provides the best in corrosion resistance. The design makes Bearing Buddy an easy way to protect your bearings by keeping water out Ensures longer-lasting fit than plastic or aluminum products Includes rubber covers Installs easily Made in the USA Specs: Fits 1.980" hub bore Works with all internally threaded hubs Bearing Buddy

Cap Style:
 Bearing Protector

Outer Diameter:
 1.98 Inch

Brand:
 Bearing Buddy

Construction:
 Stainless Steel

Type of Bearing Protector:
 Threaded

$32.95
  (13)

Galvanized finish is great for marine use. E-Z Lube design simplifies lubrication. Trailer hub fits 3,500-lb E-Z lube axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and galvanized lug nuts included. diameter: 1.719" Outer diameter: 2.565" Corrosion Resistance for Marine Use This trailer hub assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile

Hub Style:
 Hub

Bolt Pattern:
 5 on 4-1/2 Inch

Inner Bearing:
 L68149

Outer Bearing:
 L44649

Axle Capacity:
 For 3500 lbs Axles

Hub Type:
 EZ Lube

Wheel Size Compatibility:
 13 Inch
 14 Inch
 14-1/2 Inch
 15 Inch
 16 Inch
 16-1/2 Inch
 17-1/2 Inch

Brand:
 Dexter

$39.85
  (303)

Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8". The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy

Cap Style:
 Bearing Protector

Outer Diameter:
 2.717 Inch

Brand:
 Bearing Buddy

Construction:
 Chrome Plated

Type of Bearing Protector:
 Non-Threaded

$34.95
  (15)

Features: Fits Kodiak Boat Buddy for Drive-On Boat Trailers (KBB1) Quantity: 1 U-bolt BOW3/8 Kodiak Replacement U-Bolt for Boat Buddy I

 Boat Trailer Parts

 Hardware

 Replacement Parts

 U-Bolts

 Kodiak

$8.95

Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control spring-loaded piston outward 1/8". The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering

Cap Style:
 Bearing Protector

Outer Diameter:
 1.968 Inch

Brand:
 Bearing Buddy

Construction:
 Chrome Plated

Type of Bearing Protector:
 Non-Threaded

$21.95
  (3)

Galvanized finish is great for marine use. E-Z Lube design simplifies lubrication. Trailer hub fits 2,200-lb idler axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and galvanized lug nuts included. required Specs: Application: 2,200-lb axles with E-Z Lube spindles that require a 2-1/4" inner diameter grease seal Hub flange diameter: 6-1/2" Works with 13" - 15" wheels Bolt pattern: 5

Hub Style:
 Hub

Bolt Pattern:
 5 on 4-1/2 Inch

Inner Bearing:
 L44649

Outer Bearing:
 L44649

Axle Capacity:
 For 2200 lbs Axles

Hub Type:
 EZ Lube

Wheel Size Compatibility:
 13 Inch
 14 Inch
 14-1/2 Inch
 15 Inch

Brand:
 Dexter

$40.95
  (303)

Great for marine applications; the stainless steel construction provides the best in corrosion resistance. The design makes Bearing Buddy an easy way to protect your bearings by keeping water out To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8". The O-ring inside

Cap Style:
 Bearing Protector

Outer Diameter:
 2.047 Inch

Brand:
 Bearing Buddy

Construction:
 Stainless Steel

Type of Bearing Protector:
 Non-Threaded

$28.95
  (27)

Features: Fits Kodiak Boat Buddy for Drive-On Boat Trailers (KBB2) Quantity: 1 U-bolt 1/2BOWEYE (BOW1/2) Kodiak Replacement U-Bolt for Boat Buddy II

 Boat Trailer Parts

 Hardware

 Replacement Parts

 U-Bolts

 Kodiak

$14.33

Minimize grease leakage and maximize the life of your trailer's grease seals by switching to this smooth-operating system. The high-quality neoprene seals ride on consistently greased stainless steel rings for easy, free movement. Buddy models with 1.980" hub bore Also works with EZ Lube spindles Grease seal dimensions: Inner diameter: 1.375" Outer diameter: 1.980" Seal ring dimensions: Inner diameter: 1.0645"

Product Type:
 Grease Seal

Inner Diameter:
 1.375 Inch I.D.

Outer Diameter:
 1.98 Inch O.D.

Brand:
 Bearing Buddy

$14.99
  (15)

Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control outward 1/8". The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel

Cap Style:
 Bearing Protector

Outer Diameter:
 2.047 Inch

Brand:
 Bearing Buddy

Construction:
 Chrome Plated

Type of Bearing Protector:
 Non-Threaded

$21.95
  (112)



< Previous    
1   2   3    . . . 65










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com