Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I would have a qualified weldor, weld a Safety Chain Loop, #E950, to the bottom of the trailer frame which would give you an attachment point for the safety chains like part #2118-348-04, with Safety Chain Quick Links, #2114-553-04
view full answer...You will need the Curt Class III Round Tube Trailer Hitch, item #13534, and with the tow package you will need the T-One Connector Wiring Harness with 4 Pole Trailer Connector - Toyota Highlander, item #118449. I would go ahead and install the…
view full answer...The wiring harness for your taillights located in the rear hatch is ran at the top of the vehicle under the headliner. Therefore, the easiest way to access the reverse light circuit would involve tapping into the wire loom at the top of the hatch…
view full answer...To find the reverse light circuit on a vehicle is pretty easy but it may take digging around in the door panels or interior panels of the vehicle. What you need to do is find the wires that lead into the reverse lights on your vehicle. Test both of…
view full answer...What you plan on doing to convert your 4-way to a 5-way is the correct way to do it. If you need a 5-way you could get a Hopkins Endurance 5-Way Flat Trailer Connector #HM47900. To find the reverse light circuit in your 2010 Toyota Highlander you…
view full answer...Your 2018 Chevy Colorado has the brake controller wiring ran under the dash of the truck but there isn't an adapter that uses a connector. Reason being there's only 4 blunt cut wires under your vehicle dash for the brake controller wiring and…
view full answer...On this page if you there is a heading titled "Featured Help Information" (most likely have to scroll down below part links), that will have the install video for a brake controller in a 2018 Chevy Colorado that I mentioned in the answer…
view full answer...In regards to installing a trailer wiring harness like the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56320 on a 2018 Ford Escape, you must run the power wire directly to the battery per the instructions. This…
view full answer...When installing a trailer wiring harness like part #C56320 on your 2017 Escape, the Black power wire needs to be run to the positive battery post. A lot of folks want to use a circuit near the back of the vehicle instead of running the wire all the…
view full answer...Your 2021 Hyundai Palisade has brake controller wiring that runs from the port under the dash back to the plug that the Curt 7-way kit part #C68JR plugs into. That is why this kit that fits your vehicle does not have any wiring that runs from the…
view full answer...Because it is only for a 2022 Hyundai Palisade that has the factory tow package, you do not need to route any wires whatsoever to add the Curt 7-way that fits, which is the following part number: - Curt T-Connector Vehicle Wiring Harness for Factory…
view full answer...Yes, we do offer a plug-in 7-way for a 2022 Hyundai Palisade, the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part #C68JR which is a plug-in fit.
view full answer...Related Searches
Filter Your Search