Search: 4 Lug Hub   >   !Seat Covers   >  

Hub is designed for use on trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.

• 4 on 4 Inch
• For 2000 lbs Axles
• Hub
• 8 Inch Wheel
• 14 Inch Wheel
• 13 Inch Wheel
• 12 Inch Wheel
• 10 Inch Wheel
• Easy Grease
• EZ Lube
• Pre-Greased
• L44649
• L44649
• etrailer

Designed for your vehicle with 22-1/2" x 8-1/4", hub-piloted, 10-lug dually wheels with 10 hand holes. These 4 durable stainless steel Wheel Liners add life to your existing wheels. Hardware included.

• 22-1/2 x 8-1/4 Inch Wheels
• Wheel Covers
• Stainless Steel
• Front and Rear Wheels
• 10 Hand Holes
• Namsco

Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.

• 4 on 4 Inch
• For 2000 lbs Axles
• Hub
• 8 Inch Wheel
• 14 Inch Wheel
• 10 Inch Wheel
• 12 Inch Wheel
• 13 Inch Wheel
• Standard
• L44643
• L44643
• etrailer

Designed for your vehicle with 22-1/2" x 8-1/4", hub-piloted, 10-lug dually wheels with 2 hand holes. These 4 durable stainless steel Wheel Liners add life to your existing wheels. Hardware included.

• 22-1/2 x 8-1/4 Inch Wheels
• Wheel Covers
• Stainless Steel
• Front and Rear Wheels
• 2 Hand Holes
• Namsco

Round trailer axle beam measures 60" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 48" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).

• 60 Inch Long
• Spindles Only
• Leaf Spring Suspension
• No Drop or Lift
• Easy Lube Spindles
• 2000 lbs
• No Hubs
• etrailer

Replace your rusty, beat up Phoenix USA rear center cap with this polished, stainless steel cap. Mounts easily over the center of your wheel's hub with existing hardware to protect against dirt and moisture. Fits 10 on 285mm bolt pattern.

• 8-1/4 Inch Hubs
• 6-1/2 Inch Hubs
• Center Wheel Caps
• Stainless Steel
• Rear Wheels
• Phoenix USA

Replaces the right hand side swing arm on your Yakima Rack and Roll trailer.

• Arms
• Watersport Carriers
• Trailers
• Rack and Roll
• Roof Rack on Wheels Parts
• Watersport Trailer Parts
• Yakima

Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.

• 4 on 4 Inch
• For 2000 lbs Axles
• Hub
• 14 Inch Wheel
• 13 Inch Wheel
• 10 Inch Wheel
• 12 Inch Wheel
• 8 Inch Wheel
• Standard
• L44649
• L44649
• etrailer

Replace your rusty, beat-up Phoenix USA rear center cap with this polished, stainless steel cap. Mounts easily over the center of your wheel's hub with existing hardware to protect against dirt and moisture. Fits 8 on 275mm bolt pattern.

• 6-1/2 Inch Hubs
• 8-1/4 Inch Hubs
• Center Wheel Caps
• Stainless Steel
• Rear Wheels
• Phoenix USA

Replaces the right side wheel block on your Yakima Rack and Roll trailer.

• Wheel Block
• Trailers
• Watersport Carriers
• Rack and Roll
• Watersport Trailer Parts
• Roof Rack on Wheels Parts
• Yakima

Rustproof stainless steel hub is ideal for extended marine use. Fits 3,500-lb axles with #84 spindles. Can be used on idler axles or can be paired with a 10" slip-on rotor for disc brake applications. 1/2" Wheel studs are included.

• 5 on 4-1/2 Inch
• For 3500 lbs Axles
• Hub
• 13 Inch Wheel
• 15 Inch Wheel
• 14-1/2 Inch Wheel
• 14 Inch Wheel
• Standard
• L44649
• L68149
• Kodiak

Add a touch of class to your rear wheel with this polished, stainless steel center cap. Shiny cap mounts easily over the center of your wheel's hub to protect against dirt and moisture. Fits 10 on 285mm bolt pattern.

• 8-1/4 Inch Hubs
• Center Wheel Caps
• Stainless Steel
• Rear Wheels
• Phoenix USA

Replaces the wheels on your Yakima Rack and Roll trailer.

• Tires and Wheels
• Trailers
• Watersport Carriers
• Rack and Roll
• Roof Rack on Wheels Parts
• Watersport Trailer Parts
• Yakima

Add a touch of class to your rear wheel with this polished, stainless steel center cap. Shiny cap mounts easily over the center of your wheel's hub to protect against dirt and moisture. Fits 8 on 275mm bolt pattern.

• 8-1/4 Inch Hubs
• Center Wheel Caps
• Stainless Steel
• Rear Wheels
• Phoenix USA

This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.

• 15-15/16L x 1-1/2W Inch
• Submersible Lights
• Clearance Lights
• Red
• Rear Clearance
• Surface Mount
• ID Bar
• Optronics

Add a touch of class to your rear wheel with this polished, stainless steel center cap. Shiny cap mounts easily over the center of your wheel's hub to protect against dirt and moisture. Fits 10 on 285mm bolt pattern.

• 8-1/4 Inch Hubs
• Center Wheel Caps
• Stainless Steel
• Rear Wheels
• Phoenix USA

White power coated, 12" steel wheel features a 4 on 4 bolt pattern and meets Department of Transportation standards.

• 4 on 4 Inch
• 12 Inch
• Wheel Only
• Steel Wheels - Powder Coat
• Dexstar

No more hassling with bolts. This polished, stainless steel center cap has a convenient clip-mount design that lets you snap your center cap into place in no time to protect your hub against dirt and moisture. Fits 8 on 275mm bolt pattern.

• 8-1/4 Inch Hubs
• Center Wheel Caps
• Stainless Steel
• Rear Wheels
• Phoenix USA

Insert this heavy-duty mount into your 2" hitch to get 4 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory. Tongue weight is 1,500 lbs.

• Class IV
• 10000 lbs GTW
• Drop - 7 Inch
• Rise - 7 Inch
• Adjustable Ball Mount
• Stacked Receivers
• 2 Inch Ball
• 2-5/16 Inch Ball
• Two Balls
• Steel Shank - Gray
• Steel Ball
• Gen-Y Hitch

Center cap with pop out center gives you easy hub access to grease your wheel bearings without removing your entire cap. Convenient, clip-mount design lets you snap your center cap into place over your hub in no time. Fits 10 on 285mm bolt pattern.

• 8-1/4 Inch Hubs
• Center Wheel Caps
• Stainless Steel
• Rear Wheels
• Phoenix USA

This hanger bracket secures the slipper end of a slipper spring on your trailer's suspension. It is constructed of corrosion-resistant galvanized steel.

• 1-3/4 Inch Tall
• Slipper Springs - 1-3/4 Inch
• Hangers
• Single Axle
• Tandem Axle
• Triple Axle
• Boat Trailer
• Snowmobile Trailer
• CE Smith

This hanger bracket secures the eye end of a slipper spring on your aluminum or steel trailer's suspension. It is constructed of corrosion-resistant galvanized steel and accepts a 9/16" shackle bolt.

• 2-1/4 Inch Tall
• Slipper Springs - 1-3/4 Inch
• Hangers
• Single Axle
• Triple Axle
• Tandem Axle
• Boat Trailer
• Snowmobile Trailer
• CE Smith

Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and nuts included.

• 4 on 4 Inch
• For 2000 lbs Axles
• Hub
• 8 Inch Wheel
• 12 Inch Wheel
• 13 Inch Wheel
• 10 Inch Wheel
• 14 Inch Wheel
• Easy Grease
• EZ Lube
• L44643
• L44643
• etrailer

Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 1,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.

• 24-5/8 Inch Long
• 1-3/4 Inch Wide
• Slipper Springs
• Radius End
• 1000 lbs
• Universal Group