2016 Ford Escape Roof Rack

Features:

Sleek, crescent-shaped crossbars allow you to mount a variety of roof rack accessories to your vehicle's factory side rails. Lightweight aluminum bars can support most kayaks, canoes, and rooftop cargo carriers. Locking knobs deter theft.

Features:

This complete roof rack system mounts to your vehicle with raised, factory side rails. Full-length square crossbars work with most clamp-on carriers and accessories. Vinyl-coated steel bars are corrosion resistant. Includes locks to deter theft.

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

Products works on vehicles with a glass roof or sunroof.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket truck bed rack or roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Features:

SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

Products works on vehicles with a glass roof or sunroof.

Features:

SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

If your vehicle has a glass roof, Thule doesn't recommend the use of a fairing. Please consider upgrading to an aero-shaped bar system if noise is a concern.

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Features:

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs directly on your vehicle's raised side rails.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Products works on vehicles with a glass roof or sunroof.

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

If your vehicle has a glass roof, Thule doesn't recommend the use of a fairing. Please consider upgrading to an aero-shaped bar system if noise is a concern.

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs (sold separately) to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

Products works on vehicles with a glass roof or sunroof.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs (sold separately) to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Products works on vehicles with a glass roof or sunroof.

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

If your vehicle has a glass roof, Thule doesn't recommend the use of a fairing. Please consider upgrading to an aero-shaped bar system if noise is a concern.

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Features:

Carry cargo over your vehicle's roof with this sturdy roof rack. This no-drill system installs to raised side rails with simple tools. Crossbars work with traditional clamp-on accessories.

Features:

These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. 4 Roof rack legs install to the raised factory side rails on your vehicle's roof. Compatible with many Rhino-Rack accessories.

Features:

These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.