CALL NOW - 800-298-8924
Product Experts Available Now!
Free Shipping on Orders Over $99
Complete Kit Includes:
Roof Rack Specs:
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
The Hullaport TH834, TH835, TH835XT, TH835XTR, and TH835PRO will require the use of THXADAPT11 when mounting to AeroBlade or AeroBlade Edge bars
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accommodates accessories that clamp around bars.
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Caution! Proper tower balance and tower placement is critical for this installation. Be sure that racks remain centered on the vehicle throughout installation. Pay close attention to the gold slider positions and increase adjustment post in 1/2 to 1/4 turn increments; as necessary. Alternate between towers until the gold sliders are at equal levels in relation to the hash marks on the towers and the cam covers close with firm and equal resistance.
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap
The sunroof should not be opened while the rack is installed. Remove rack when not in use
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
Any load/mount extending beyond the rear hatch seam may cause interference
Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side
Foam blocks limit capacity to one boat per vehicle
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Custom Fit Accessories For Your2013 Ford C-Max
2013 Ford C-Max Trailer Hitch
2013 Ford C-Max Trailer Wiring
2013 Ford C-Max Brake Controller
2013 Ford C-Max Base Plate for Tow Bar
2013 Ford C-Max Vehicle Tow Bar Brake System
2013 Ford C-Max Vehicle Tow Bar Wiring
2013 Ford C-Max Roof Rack
2013 Ford C-Max Trunk Bike Rack
2013 Ford C-Max Performance Chip Tuners
2013 Ford C-Max Tire Chains
2013 Ford C-Max Floor Mats
2013 Ford C-Max Vehicle Covers
2013 Ford C-Max Windshield Wiper Blades
Popular Ford C-Max Accessories
Filter Products (15)
Contact and Help
What our customers are saying:
I ordered the item and within a very prompt time the order was shipped and on its way!, very nice!
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com