Free Shipping on Orders Over $99
Complete Kit Includes:
Roof Rack Specs:
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.
Fits over factory rails.
Roof rack is not intended for off-road use.
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accommodates accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
Roof mounted antenna may need to be removed to prevent interference with long loads, boxes
Maximum allowable weight load is 125 lbs
This fit requires the use of Q-Tower #Y00124. Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions
Boa bike mount will not work due to crossbar spread limitations
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.
Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Canoes must be 14 feet or less on this application
Clamps directly to edge of roof under the doors.
The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
INXB108 is designated to be the frontmost bar while INXB100 is the rear
This locking, removable roof rack mounts quickly and easily to your vehicle's naked roof with custom-fit clips and keeps a low profile with a unique, elliptical design. Crossbars include T-slots for mounting Rola carriers and accessories.
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Custom Fit Accessories For Your2012 Kia Forte
2012 Kia Forte Trailer Hitch
2012 Kia Forte Trailer Wiring
2012 Kia Forte Brake Controller
2012 Kia Forte Base Plate for Tow Bar
2012 Kia Forte Vehicle Tow Bar Brake System
2012 Kia Forte Vehicle Tow Bar Wiring
2012 Kia Forte Roof Rack
2012 Kia Forte Trunk Bike Rack
2012 Kia Forte Exhaust
2012 Kia Forte Performance Chip Tuners
2012 Kia Forte Interior Lights
2012 Kia Forte Exterior Lights
2012 Kia Forte Tire Chains
2012 Kia Forte Fluid Filters
2012 Kia Forte Vehicle Engine Heaters
2012 Kia Forte Floor Mats
2012 Kia Forte Trim Kits
2012 Kia Forte Vehicle Covers
2012 Kia Forte Side Window Vents
2012 Kia Forte Lamp Guards
2012 Kia Forte Replacement Mirrors
2012 Kia Forte Windshield Wiper Blades
Popular Kia Forte Accessories
Filter Products (16)
Contact and Help
What our customers are saying:
You folks are fast. Thank you very much.
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com