CALL NOW - 800-298-8924
Product Experts Available Now!
Free Shipping on Orders Over $99
Select Vehicle Style:
Complete Kit Includes:
Roof Rack Specs:
Economically priced, removable roof rack clamps to your vehicle's naked roof. The square, steel crossbars can accommodate a variety of accessories such as bike racks, ski carriers and cargo baskets. Included locks secure the rack to your roof.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
When open, sunroof may interfere with some accessories
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
SideWinder (Tandem Bike Mount - Y02071) will not work due to crossbar spread limitations
Loads are limited to bikes, skis, and a BasketCase. The total weight of the racks and loads must not exceed Yakima's weight limit of that vehicle's factory rack
Boa bike mount will not work due to crossbar spread limitations
Caution! Proper tower balance and tower placement is critical for this installation. Be sure that racks remain centered on the vehicle throughout installation. Pay close attention to the gold slider positions and increase adjustment post in 1/2 to 1/4 turn increments; as necessary. Alternate between towers until the gold sliders are at equal levels in relation to the hash marks on the towers and the cam covers close with firm and equal resistance.
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
This fit requires the use of Q-Tower #Y00124. Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accommodates accessories that clamp around bars.
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Roof rack is not intended for off-road use.
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
This locking, removable roof rack mounts easily to your vehicle's naked roof with custom-fit clips. Its unique, elliptical design gives it a low, aerodynamic profile. Aluminum crossbars include T-slots for mounting Rola carriers and accessories.
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.
Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Canoes must be 14 feet or less on this application
Clamps directly to edge of roof under the doors.
Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.
Combining the strength of steel with an aerodynamic shape, these innovative crossbars attach to Yakima towers to create a heavy-duty, quiet roof rack. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a strong, stylish roof rack. SmartFill rubber strips in T-slots push down to accommodate carriers and accessories - no need to trim. Full-length bars maximize cargo capacity.
Custom Fit Accessories For Your2012 Honda Accord
2012 Honda Accord Trailer Hitch
2012 Honda Accord Trailer Wiring
2012 Honda Accord Brake Controller
2012 Honda Accord Base Plate for Tow Bar
2012 Honda Accord Vehicle Tow Bar Brake System
2012 Honda Accord Vehicle Tow Bar Wiring
2012 Honda Accord Roof Rack
2012 Honda Accord Trunk Bike Rack
2012 Honda Accord Cold Air Intake
2012 Honda Accord Air Filter
2012 Honda Accord Transmission Cooler
2012 Honda Accord Performance Chip Tuners
2012 Honda Accord Interior Lights
2012 Honda Accord Exterior Lights
2012 Honda Accord Tire Chains
2012 Honda Accord Throttle Body Spacer
2012 Honda Accord Fluid Filters
2012 Honda Accord Vehicle Engine Heaters
2012 Honda Accord Floor Mats
2012 Honda Accord Trim Kits
2012 Honda Accord Vehicle Covers
2012 Honda Accord Bug Shield
2012 Honda Accord Side Window Vents
2012 Honda Accord Lamp Guards
2012 Honda Accord Vehicle Seat Covers
2012 Honda Accord Replacement Mirrors
2012 Honda Accord Windshield Wiper Blades
Popular Honda Accord Accessories
Filter Products (34)
Contact and Help
What our customers are saying:
Very quick turn around time. Thanks.
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com