Free Shipping on Orders Over $99
Complete Kit Includes:
Roof Rack Specs:
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
Roof rack is not intended for off-road use.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap
Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.
When open, sunroof may interfere with some accessories
Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Canoes must be 14 feet or less on this application
Clamps directly to edge of roof under the doors.
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
INXB138 is designated to be the frontmost bar while INXB130 is the rear
INXB108 is designated to be the frontmost bar while INXB100 is the rear
INXB130 is designated to be the frontmost bar while INXB123 is the rear
Custom Fit Accessories For Your2012 Ford Fusion
2012 Ford Fusion Trailer Hitch
2012 Ford Fusion Trailer Wiring
2012 Ford Fusion Brake Controller
2012 Ford Fusion Base Plate for Tow Bar
2012 Ford Fusion Vehicle Tow Bar Brake System
2012 Ford Fusion Vehicle Tow Bar Wiring
2012 Ford Fusion Roof Rack
2012 Ford Fusion Trunk Bike Rack
2012 Ford Fusion Air Filter
2012 Ford Fusion Exhaust
2012 Ford Fusion Suspension Enhancement
2012 Ford Fusion Transmission Cooler
2012 Ford Fusion Performance Chip Tuners
2012 Ford Fusion Vehicle Lights
2012 Ford Fusion Tire Chains
2012 Ford Fusion Vehicle Engine Heaters
2012 Ford Fusion Floor Mats
2012 Ford Fusion Trim Kits
2012 Ford Fusion Vehicle Covers
2012 Ford Fusion Bug Shield
2012 Ford Fusion Side Window Vents
2012 Ford Fusion Lamp Guards
2012 Ford Fusion Vehicle Seat Covers
2012 Ford Fusion Replacement Mirrors
2012 Ford Fusion Windshield Wiper Blades
Popular Ford Fusion Accessories
Filter Products (20)
Contact and Help
What our customers are saying:
Very quick turn around time. Thanks.