2011 Ram 1500 Roof Racks

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Maximum allowable weight load is 100 lbs

Caution! Proper tower balance is critical for this installation. Pay close attention to the gold slider positions and increase micro adjuster in small increments, alternating between towers until the sliders are at equal levels in relation to the hash marks on the towers. Slider positions may not be equal from one bar to the next

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again

Loads limited to Skis, Bikes, Boats, Gear Baskets, SpaceCadet 15s, Platinum/BlackTop 16s, and SkyBox/SkyBox Pro 16s. No long loads that cannot be tied down at the ends

This fit requires the use of Q-Tower #Y00124.  Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Maximum allowable weight load is 100 lbs

Caution! Proper tower balance is critical for this installation. Pay close attention to the gold slider positions and increase micro adjuster in small increments, alternating between towers until the sliders are at equal levels in relation to the hash marks on the towers. Slider positions may not be equal from one bar to the next

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again

Loads limited to Skis, Bikes, Boats, Gear Baskets, SpaceCadet 15s, Platinum/BlackTop 16s, and SkyBox/SkyBox Pro 16s. No long loads that cannot be tied down at the ends

This fit requires the use of Q-Tower #Y00124.  Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

Silver, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Features:

Silver, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Features:

Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Features:

Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Features:

Add 1 silver, lightweight aluminum crossbar to your naked roof with this Rhino-Rack 2500 Series roof-rack half kit. Replace a damaged crossbar or add an extra to help distribute the load on your roof.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use.

A single load bar, on the cab of the truck, is used in conjunction with T-Load Hitch Mount to carry long loads. The T-Load Hitch Mount requires a 2" hitch receiver (sold separately).

Features:

Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.

Installation Notes:

When open, sunroof may interfere with some accessories

Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and read of the vehicle, in addition to the rack.

Due to crossbar spread limitation, Kayak Stacker is not recommended on this application

Canoes must be 14 feet or less on this application

Clamps directly to edge of roof under the doors.

Features:

The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.

Installation Notes:

When open, sunroof may interfere with some accessories

Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and read of the vehicle, in addition to the rack.

Due to crossbar spread limitation, Kayak Stacker is not recommended on this application

Canoes must be 14 feet or less on this application

Clamps directly to edge of roof under the doors.