2011 Jeep Grand Cherokee Roof Racks

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and read of the vehicle, in addition to the rack.

Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again

Any load/mount extending beyond the rear hatch seam may cause interference

Maximum allowable weight load is 125 lbs

This fit requires the use of Q-Tower #Y00124.  Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Boa bike mount will not work due to crossbar spread limitations

Tech Tip: This product should be used on vehicles equipped with the E Group package. If E Group package is present, you should see a metal strip on top of the flush mount side rails. You will not need the pin-style claws, but will require the shorter claw bases

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Tech Tip: This product should be used on the Laredo equipped with the E Group package. If E Group package is present, you should see a metal strip on top of the flush mount side rails.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Tech Tip: This product should be used on the Laredo equipped with the E Group package. If E Group package is present, you should see a metal strip on top of the flush mount side rails.

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use.

Application includes vehicles equipped with a panoramic sunroof.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use.

Application includes vehicles equipped with a panoramic sunroof.

Features:

Silver, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use.

Application includes vehicles equipped with a panoramic sunroof.

Features:

The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.

Installation Notes:

Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and read of the vehicle, in addition to the rack.

Any load/mount extending beyond the rear hatch seam may cause interference

Features:

Silver, heavy-duty aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a ladder rack or roof rack for your vehicle's naked roof. Sturdy, square bars have built-in C-channels for mounting contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use.

Application includes vehicles equipped with a panoramic sunroof.

Features:

Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.

Installation Notes:

Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and read of the vehicle, in addition to the rack.

Any load/mount extending beyond the rear hatch seam may cause interference

S17 has 51.25" of usable crossbar length. Use S18 to get up to an extra 5.75" of usable length.

Features:

These lightweight aluminum crossbars work with Rhino-Rack legs to create a sleek, aerodynamic roof rack for your vehicle. The elliptical crossbars are rustproof and have built-in channels for mounting accessories.

Installation Notes:

This system attaches to OEM fixed mounting points on your vehicle's roof.

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system attaches to OEM fixed mounting points on your vehicle's roof.

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system attaches to OEM fixed mounting points on your vehicle's roof.

Features:

These lightweight aluminum crossbars work with Rhino-Rack legs to create a sleek, aerodynamic roof rack. The elliptical crossbars are rust resistant and they include built-in channels for mounting accessories.

Installation Notes:

This system attaches to OEM fixed mounting points on your vehicle's roof.

Features:

Pair these super-strong, ultra-quiet load bars with a Thule foot pack to create an aftermarket roof rack with a factory look. These stylish, aluminum bars perfectly complement your vehicle's roofline and have T-tracks for mounting accessories.

Installation Notes:

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Tech Tip: This product should be used on the Laredo equipped with the E Group package. If E Group package is present, you should see a metal strip on top of the flush mount side rails.

Features:

Quick and easy to install, this roof-rack system attaches directly to the OEM fixed mounting points of your vehicle. The rack includes a pair of black, low-profile Sportz crossbars with built-in channels for mounting Aero/Sportz accessories.

Installation Notes:

This system attaches to OEM fixed mounting points on your vehicle's roof.

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Tech Tip: This product should be used on the Laredo equipped with the E Group package. If E Group package is present, you should see a metal strip on top of the flush mount side rails.