2010 Hyundai Santa Fe Roof Racks

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

The factory luggage carrier may interfere with the Yakima rack

The factory luggage carrier may interfere with some accessories

When open, sunroof may interfere with some accessories

Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again

Roof mounted antenna may need to be removed to prevent interference with long loads, boxes

Maximum allowable weight load is 125 lbs

This fit requires the use of Q-Tower #Y00124.  Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions

This kit fits over factory racks

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This vehicle comes with preset mounting points designed by the automobile manufacturer. Refer to load carrier instructions for correct load carrier placement

This fit application requires specific mounting positions which may be incompatible with the hole patterns on some luggage boxes. Additional holes may be drilled in some boxes

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

Please note system fits over factory flush rails.

Roof rack is not intended for off-road use.

Features:

Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.

Installation Notes:

Please note system fits over factory flush rails.

Roof rack is not intended for off-road use.

Features:

Silver, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

Please note system fits over factory flush rails.

Roof rack is not intended for off-road use.

Features:

Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.

Installation Notes:

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Any load/mount extending beyond the rear hatch seam may cause interference

Clamps onto raised roof rail.

Features:

Quick and easy to install, this kit is great for adding an aftermarket roof-rack system to your vehicle with raised, factory side rails. Includes 4 rail-grabbing legs; 2 black, 45" long Aero crossbars; and 4 locking endcaps.

Features:

The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.

Installation Notes:

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Due to crossbar spread limitation, Kayak Stacker is not recommended on this application

Canoes must be 14 feet or less on this application

Any load/mount extending beyond the rear hatch seam may cause interference

Clamps onto flush roof rail.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This vehicle comes with preset mounting points designed by the automobile manufacturer. Refer to load carrier instructions for correct load carrier placement

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

This fit application requires specific mounting positions which may be incompatible with the hole patterns on some luggage boxes. Additional holes may be drilled in some boxes

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

Silver, heavy-duty aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a ladder rack or roof rack for your vehicle's naked roof. Sturdy, square bars have built-in C-channels for mounting contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use.

Features:

These low-profile, aerodynamic crossbars clamp to your vehicle's raised factory side rails to create the quietest style of roof rack on the market. The locking aluminum bars provide a from-the-factory look and have built-in slots for accessories.

Installation Notes:

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Any load/mount extending beyond the rear hatch seam may cause interference

Clamps onto raised roof rail.

Features:

Quick and easy to install, this kit is great for adding an aftermarket roof-rack system to your vehicle with raised, factory side rails. Includes 4 rail-grabbing legs; 2 silver, 45" long Aero crossbars; and 4 locking endcaps.

Features:

Pair these super-strong, ultra-quiet load bars with a Thule foot pack to create an aftermarket roof rack with a factory look. These stylish, aluminum bars perfectly complement your vehicle's roofline and have T-tracks for mounting accessories.

Installation Notes:

This vehicle comes with preset mounting points designed by the automobile manufacturer. Refer to load carrier instructions for correct load carrier placement

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

This fit application requires specific mounting positions which may be incompatible with the hole patterns on some luggage boxes. Additional holes may be drilled in some boxes

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

This removable roof-rack system mounts to your OEM raised side rails and keeps a low profile with a unique, elliptical design. Extended crossbars provide extra carrying capacity and include universal T-slots for mounting roof-rack accessories.