2008 Mitsubishi Lancer Roof Racks
Kit Includes:
- Thule Square Load Bars - Steel - 50" - Qty 2
- Thule Traverse Roof-Rack Foot Pack
- Thule Roof-Rack Fit Kit for Traverse Foot Packs - 1477
Roof Rack Specs:
Crossbars
Square Bars
Black
50 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 110 lbs
Crossbar Spread 28 inch
Features:
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Kit Includes:
- Thule Square Load Bars - Steel - 50" - Qty 2
- Thule Traverse Roof-Rack Foot Pack
- Thule Roof-Rack Fit Kit for Traverse Foot Packs - 1477
Roof Rack Specs:
Crossbars
Square Bars
Black
50 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 110 lbs
Crossbar Spread 28 inch
Features:
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Q99 Q Clips for Yakima Q Towers (QTY 2)
- Q99 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 125 lbs
Crossbar Spread 28 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Surf/Sailboard length limited to 10 feet or less on this application
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Canoes must be 14 feet or less on this application
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
Roof mounted antenna may need to be removed to prevent interference with long loads, boxes
Maximum allowable weight load is 125 lbs
This fit requires the use of Q-Tower #Y00124. Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions
Boa bike mount will not work due to crossbar spread limitations
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Q99 Q Clips for Yakima Q Towers (QTY 2)
- Q99 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 125 lbs
Crossbar Spread 28 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Surf/Sailboard length limited to 10 feet or less on this application
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Canoes must be 14 feet or less on this application
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
Roof mounted antenna may need to be removed to prevent interference with long loads, boxes
Maximum allowable weight load is 125 lbs
This fit requires the use of Q-Tower #Y00124. Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions
Boa bike mount will not work due to crossbar spread limitations
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Q5 Q Clips for Yakima Q Towers (QTY 2)
- Q83 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 125 lbs
Crossbar Spread 28 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Caution! Proper tower balance is critical for this installation. Pay close attention to the gold slider positions and increase micro adjuster in small increments, alternating between towers until the sliders are at equal levels in relation to the hash marks on the towers. Slider positions may not be equal from one bar to the next
Surf/Sailboard length limited to 10 feet or less on this application
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Canoes must be 14 feet or less on this application
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
Maximum allowable weight load is 125 lbs
This fit requires the use of Q-Tower #Y00124. Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions
Boa bike mount will not work due to crossbar spread limitations
Kit Includes:
- Thule AeroBlade Load Bars - Aluminum - 53" - Qty 2
- Thule Rapid Traverse Roof-Rack Foot Pack
- Thule Roof-Rack Fit Kit for Traverse Foot Packs - 1477
Roof Rack Specs:
Crossbars
Aero Bars
Silver
53 Inch Long
2 Bars
Aluminum
Locks Not Included
Capacity 110 lbs
Crossbar Spread 28 inch
Features:
The quietest load bars available. Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.
Kit Includes:
- Thule AeroBlade Load Bars - Aluminum - 53" - Qty 2
- Thule Rapid Traverse Roof-Rack Foot Pack
- Thule Roof-Rack Fit Kit for Traverse Foot Packs - 1477
Roof Rack Specs:
Crossbars
Aero Bars
Silver
53 Inch Long
2 Bars
Aluminum
Locks Not Included
Capacity 110 lbs
Crossbar Spread 28 inch
Features:
The quietest load bars available. Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.
Kit Includes:
- Rhino-Rack 2500 Series Roof Rack with Aero Crossbars - 49" Long - Black
- Custom DK Clamps and Pads for Rhino-Rack 2500 Series Roof Rack System
Roof Rack Specs:
Complete Roof Systems
Elliptical Bars
Black
49 Inch Long
2 Bars
Aluminum
Locks Included
Capacity 65 lbs
Features:
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Roof rack is not intended for off-road use.
Kit Includes:
- Rhino-Rack 2500 Series Roof Rack with Aero Crossbars - 49" Long - Silver
- Custom DK Clamps and Pads for Rhino-Rack 2500 Series Roof Rack System
Roof Rack Specs:
Complete Roof Systems
Elliptical Bars
Silver
49 Inch Long
2 Bars
Aluminum
Locks Included
Capacity 65 lbs
Features:
Silver, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Roof rack is not intended for off-road use.
Kit Includes:
- Rhino-Rack 2500 Series Roof Rack with Heavy-Duty Square Crossbars - 49" Long - Silver
- Custom DK Clamps and Pads for Rhino-Rack 2500 Series Roof Rack System
Roof Rack Specs:
Complete Roof Systems
Rectangle Bars
Silver
49 Inch Long
2 Bars
Aluminum
Locks Included
Capacity 65 lbs
Features:
Silver, heavy-duty aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a ladder rack or roof rack for your vehicle's naked roof. Sturdy, square bars have built-in C-channels for mounting contractor-grade accessories.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Roof rack is not intended for off-road use.
Custom Fit Accessories For Your
2008 Mitsubishi Lancer
