Free Shipping on Orders Over $99
What type of roof does your 2007 Ford Focus have?
No existing rails or crossbars
Factory side raised rails that run front to back
Flush mount rails that run front to back
Select Vehicle Style:
Complete Kit Includes:
Roof Rack Specs:
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
When open, sunroof may interfere with some accessories
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
Loads limited to Skis, Bikes, Boats, Gear Baskets, SpaceCadet 15s, Platinum/BlackTop 16s, and SkyBox/SkyBox Pro 16s. No long loads that cannot be tied down at the ends
Long loads will prevent rear hatch from opening
Roof mounted antenna may need to be removed to prevent interference with long loads, boxes
Boa bike mount will not work due to crossbar spread limitations
Maximum load is bikes, skis, and/or a BasketCase
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.
Roof rack is not intended for off-road use.
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
This load bar system is designed to be mounted directly onto your vehicle's factory installed raised side rails. 50" load bars and locks are included to complete the roof rack.
Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.
Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Canoes must be 14 feet or less on this application
Any load/mount extending beyond the rear hatch seam may cause interference
Clamps under rubber door frame moldings.
Clamps directly to edge of roof under the doors.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Custom Fit Accessories For Your2007 Ford Focus
2007 Ford Focus Trailer Hitch
2007 Ford Focus Trailer Wiring
2007 Ford Focus Base Plate for Tow Bar
2007 Ford Focus Vehicle Tow Bar Brake System
2007 Ford Focus Vehicle Tow Bar Wiring
2007 Ford Focus Roof Rack
2007 Ford Focus Trunk Bike Rack
2007 Ford Focus Suspension Enhancement
2007 Ford Focus Transmission Cooler
2007 Ford Focus Performance Chip Tuners
2007 Ford Focus Vehicle Lights
2007 Ford Focus Tire Chains
2007 Ford Focus Catalytic Converters
2007 Ford Focus Vehicle Engine Heaters
2007 Ford Focus Floor Mats
2007 Ford Focus Vehicle Covers
2007 Ford Focus Side Window Vents
2007 Ford Focus Lamp Guards
2007 Ford Focus Replacement Mirrors
2007 Ford Focus Windshield Wiper Blades
Popular Ford Focus Accessories
Filter Products (41)
Contact and Help
What our customers are saying:
Great E-shopping experience. Fast delivery!