1995 Chevrolet Tahoe Roof Racks
What type of roof does your 1995 Chevrolet Tahoe have?
Kit Includes:
- Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
- Yakima RailGrab Towers for Flat and Raised Side Rails (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
58 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 125 lbs
Crossbar Spread 38 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Maximum allowable weight load is 125 lbs
Kit Includes:
- Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
- Yakima RailGrab Towers for Flat and Raised Side Rails (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
58 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 125 lbs
Crossbar Spread 52 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Maximum allowable weight load is 125 lbs
Kit Includes:
- Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
- Q24 Q Clips for Yakima Q Towers (QTY 2)
- Q24 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
58 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 16 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
The factory luggage carrier may interfere with some accessories
Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter
Boa bike mount will not work due to crossbar spread limitations
This kit fits over factory racks
Kit Includes:
- Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
- Q24 Q Clips for Yakima Q Towers (QTY 2)
- Q24 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
58 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 50 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter
Kit Includes:
- Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
- Q24 Q Clips for Yakima Q Towers (QTY 2)
- Q24 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
- Yakima Q Stretch Kit
Roof Rack Specs:
Crossbars
Round Bars
Black
58 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 36 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter
Kit Includes:
- Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
- Q24 Q Clips for Yakima Q Towers (QTY 2)
- Q24 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
58 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 16 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter
Boa bike mount will not work due to crossbar spread limitations
Kit Includes:
- Thule Square Load Bars - Steel - 58" - Qty 2
- Thule Crossroad Roof Mounted Roof Railing Foot Pack
Roof Rack Specs:
Crossbars
Square Bars
Black
58 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 40 inch
Features:
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Installation Notes
The Railing Carrier is recommended for use on factory racks with bars that run parallel to the sides of the vehicle (front to rear). Do not exceed the recommended weight capacity for your vehicle's factory rack
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
Kit Includes:
- Thule Square Load Bars - Steel - 58" - Qty 2
- Thule Crossroad Roof Mounted Roof Railing Foot Pack
Roof Rack Specs:
Crossbars
Square Bars
Black
58 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 50 inch
Features:
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Installation Notes
The Railing Carrier is recommended for use on factory racks with bars that run parallel to the sides of the vehicle (front to rear). Do not exceed the recommended weight capacity for your vehicle's factory rack
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
Kit Includes:
- Thule AeroBlade Load Bars - Aluminum - 60" - Qty 2
- Thule Rapid Aero Crossroad Roof Mounted Railing Foot Pack
Roof Rack Specs:
Crossbars
Aero Bars
Silver
60 Inch Long
2 Bars
Aluminum
Locks Not Included
Capacity 165 lbs
Crossbar Spread 50 inch
Features:
The quietest load bars available. Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
Installation Notes
The Railing Carrier is recommended for use on factory racks with bars that run parallel to the sides of the vehicle (front to rear). Do not exceed the recommended weight capacity for your vehicle's factory rack
Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
Kit Includes:
- Rhino-Rack SXB Roof Rack for Raised, Factory Side Rails - Aero Crossbars - 53" Long - Black
Roof Rack Specs:
Complete Roof Systems
Elliptical Bars
Black
53 Inch Long
2 Bars
Aluminum
Locks Included
Capacity 165 lbs
Features:
Quick and easy to install, this kit is great for adding an aftermarket roof-rack system to your vehicle with raised, factory side rails. Includes 4 rail-grabbing legs; 2 black, 53" long Aero crossbars; and 4 locking endcaps.
Kit Includes:
- Rhino-Rack SXB Roof Rack for Raised, Factory Side Rails - Aero Crossbars - 53" Long - Silver
Roof Rack Specs:
Complete Roof Systems
Elliptical Bars
Silver
53 Inch Long
2 Bars
Aluminum
Locks Included
Capacity 165 lbs
Features:
Quick and easy to install, this kit is great for adding an aftermarket roof-rack system to your vehicle with raised, factory side rails. Includes 4 rail-grabbing legs; 2 silver, 53" long Aero crossbars; and 4 locking endcaps.
Kit Includes:
- Thule Rapid Aero Load Bars - Aluminum - 60" - Qty 2
- Thule Rapid Aero Crossroad Roof Mounted Railing Foot Pack
Roof Rack Specs:
Crossbars
Elliptical Bars
Silver
60 Inch Long
2 Bars
Aluminum
Locks Not Included
Capacity 165 lbs
Crossbar Spread 50 inch
Features:
These ultra-lightweight, aluminum load bars attach to Thule roof-rack feet to create a sturdy, stylish roof-mounted rack system that is both weather resistant and aerodynamic. Accomodates accessories that mount in T-slots or clamp onto bars.
Installation Notes
The Railing Carrier is recommended for use on factory racks with bars that run parallel to the sides of the vehicle (front to rear). Do not exceed the recommended weight capacity for your vehicle's factory rack
Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
Custom Fit Accessories For Your
1995 Chevrolet Tahoe
