1990 Toyota Camry Roof Racks
What type of roof does your 1990 Toyota Camry have?
Kit Includes:
- Thule Square Load Bars - Steel - 50" - Qty 2
- Thule Specialty Foot Pack for Thin Gutter Vehicles
Roof Rack Specs:
Crossbars
Square Bars
Black
50 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 32 inch
Features:
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Kit Includes:
- Thule Square Load Bars - Steel - 50" - Qty 2
- Thule Specialty Foot Pack for Thin Gutter Vehicles
Roof Rack Specs:
Crossbars
Square Bars
Black
50 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 32 inch
Features:
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof.
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Yakima RailGrab Towers for Flat and Raised Side Rails (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 100 lbs
Crossbar Spread 32 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
Maximum allowable weight load is 100 lbs
Loads are limited to 2 bikes, skis, and a BasketCase. The total weight of the racks and loads must not exceed Yakima's weight limit of that vehicle's factory rack
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Yakima 1A Raingutter Towers (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 34 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
Towers will be installed over door frames only
Use Yakima clip spacers on the front towers only
The rubber/chrome door seals and/or trim may deform or be damaged under prolonged contact with any roof rack towers and/or clips. Remove rack when not in use
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Q30 Q Clips for Yakima Q Towers (QTY 2)
- Q30 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 36 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
The factory luggage carrier may interfere with some accessories
The rubber/chrome door seals and/or trim may deform or be damaged under prolonged contact with any roof rack towers and/or clips. Remove rack when not in use
This kit fits over factory racks
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Q30 Q Clips for Yakima Q Towers (QTY 2)
- Q30 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 34 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Yakima 1A Raingutter Towers (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 34 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Towers will be installed over door frames only
Use Yakima clip spacers on the front towers only
The rubber/chrome door seals and/or trim may deform or be damaged under prolonged contact with any roof rack towers and/or clips. Remove rack when not in use
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Q30 Q Clips for Yakima Q Towers (QTY 2)
- Q30 Q Clips for Yakima Q Towers (QTY 2)
- Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 36 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
The rubber/chrome door seals and/or trim may deform or be damaged under prolonged contact with any roof rack towers and/or clips. Remove rack when not in use
Kit Includes:
- Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
- Yakima 1A Raingutter Towers (QTY 4)
Roof Rack Specs:
Crossbars
Round Bars
Black
48 Inch Long
2 Bars
Steel
Locks Not Included
Capacity 165 lbs
Crossbar Spread 32 inch
Features:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Installation Notes
This system utilizes a clamp-style attatchment to secure itself onto your vehicle's roof
Towers will be installed over door frames only
Use Yakima clip spacers on the front towers only
Kit Includes:
- Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 50" Long - Qty 2
- Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2
- Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2
- Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 55" Long - Qty 2
Roof Rack Specs:
Crossbars
Rectangle Bars
Silver
50 Inch Long
2 Bars
Aluminum
Locks Not Included
Capacity 220 lbs
Features:
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
Kit Includes:
- Rhino-Rack Aero Roof Rack Crossbars - Silver - 50" Long - Qty 2
- Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2
- Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2
- Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 55" Long - Qty 2
Roof Rack Specs:
Crossbars
Elliptical Bars
Silver
50 Inch Long
2 Bars
Aluminum
Locks Not Included
Capacity 220 lbs
Features:
These lightweight aluminum crossbars work with Rhino-Rack legs to create a sleek, aerodynamic roof rack. The elliptical crossbars are rust resistant and they include built-in channels for mounting accessories.
Custom Fit Accessories For Your
1990 Toyota Camry