customer service | view cart 
Question Was Asked By - Rick C
Drop Dimensions of 11 Inch Weight Distribution Shank 3215
Question:
Will this shank 3215 allow 3 1/2 w/ a round bar ball mount? Is the 6 7/8 in the description the max? What is the minimum for round bar mount? Thanks
asked by: Rick C
Expert Reply:
The minimum drop is 4-1/2 inches, the maximum is 6-7/8 inches and it adjusts by 1-1/4 inch increments. Since you need a drop of 3-1/2 inches, this part is not the correct part. Part # AMAC1 has a maximum drop of 3-3/8 inches which is close enough to 3-1/2 inches. It has a maximum tongue weight capacity of 2,000 pounds and maximum trailer weight of 10,000 pounds. If you have a heavier trailer weight, you can use part # 54977. It has a minimum drop of 3-1/4 inches which is close enough to your 3-1/2 inches. It has a higher trailer weight capacity of 14,000 pounds and maximum tongue weight of 1,700 pounds.
expert reply by: Patrick B
Products Referenced in This Question
Weight-Distributing Shank, 11"
Product Summary:
Weight Distribution
Weight Distribution Shanks
1400 lbs TW
14000 lbs GTW
Product Specs:
2 Inch Hitch
more information...
Titan Weight Distributing Shank 8-1/4" Rise or 5-3/4" Drop
Product Summary:
Weight Distribution
Weight Distribution Shanks
1700 lbs TW
14000 lbs GTW
Product Specs:
2-1/2 Inch Hitch
more information...
Weight Distributing Shank - Cushioned
Product Summary:
Weight Distribution
Weight Distribution Shanks
2000 lbs TW
10000 lbs GTW
Product Specs:
2 Inch Hitch
more information...
Product Page this Question was Asked From
Weight Distributing Shank, 11"
Product Summary:
Weight Distribution
Weight Distribution Shanks
1400 lbs TW
14000 lbs GTW
Product Specs:
2 Inch Hitch
more information...
Have a question for the experts, click here.
Questions about part number 3344
Drop Dimensions of 11 Inch Weight Distribution Shank 3215Related Questions
Long Weight Distribution ShankWhat is the Length of the Bulldog Plunger Pin Assembly, # BD500103
Recommendation of Safe and Economical Parts for Towing a 1990 VW Vanagon Behind an RV
Compatability fo the Softride Bike Rack Extender Bar with the Yakima Double Down 2 Bike Rack
Dimensions of the Removable Steel Foot with Pin for A-Frame Trailer Jacks
Compatibility of the Atwood Jack Castor with a 2 Inch Outer Diameter Ram
Compatability of Reese Remote Control and Actuator for Kwik Slide Part # 300749 and Draw-Tite 15K
Mounting Hole Size for Replacment Shock Absorber Part # 1844-2
Replacement Parts for the SportRack Spare Tire Mount Bike Rack
Replacement Wheel Tray for a Sportworks Bike 4 Bike Rack
Is the Roll Pin Included with the Replacement Trunnion, Item # 58097
How Does Optronics Fender Bracket part # A67CVB Ground Electrically
Weight Distribution Spring Bars Upgrade for the Reese Heavy Duty Round Bar System
Will the Reese Weight Distributing Spring Bars Work with a EAZ Lift Weight Distribution Head
What Would Cause the Cam Arm on a Dual Cam Sway Control to Break?
Load Bars for 2009 or 2010 Subaru Forester with Factory Raised Rails
Replacement Spring Bar Retainer Package for an Older Draw-Tite Weight Distribution System
Roof Mount Rack for 1980 Dodge Ramcharger
How Does the 4-Way Mounting Bracket Keep the Connector from Falling Out
Availability of Rail Kit for the Draw-Tite # 6500 Cargo Carrier
Is it Safe to Use Modified Weight Distribution Shank
Availability of Actuator for Reese Remote Control and Actuator for Kwik Slide Fifth Wheel # 30079
Placement of Washers on the Draw-Tite Round Bar Bolt Together Head # 3279
Replacement Trunnion Ends for Spring Bars
Will the Thule Fat Mouth - Rooftop Ski Rack Adapter Fit the Factory Cross Bars on A 2005 Volvo XC90
