customer service | view cart
Question Was Asked By - Bill
Question:
I have a 2008 1500 2wd LT2 Avalanche with the factory 7 pin trailer connector and I want to install a brake controller. Ive no clue what Type or Mfg would best fit my vehicle and my usage. Most common towing would consist of 8X20 enclosed motorcycle trailer w/max of 4 touring bikes. GVW with motorcycles would not exceed 5,000lbs.
asked by: Bill
Expert Reply:
Since you already have your 7-pole trailer connector on the back of your 2008 Chevy Avalanche, you are halfway there. I would suggest the Prodigy Proportional Brake Controller, part # 90185 which is a wonderful brake controller. This brake controllers will stop the trailer in proportion to the stopping on your Avalanche, which is easier on your brakes than a time-delayed brake controller, especially if you will be towing frequently. On your Avalanche, no plug is present under the dash, but the wires are already run. You only need to connect the brake control wires together with those already present under the dash, which is a breeze. We also have a video of the Prodigy installed on a 2008 Chevy Silverado. Although it is a bit different vehicle, the installation is very similar.
expert reply by: DeAnne T
Products Referenced in This Question
Tekonsha PRODIGY Brake Controller - Proportional
Product Summary:
Proportional Controller
Product Specs:
2 - 8 Brakes
0 – Pos 70 Degrees
Product Page this Question was Asked From
FAQs / Article / Videos about this Product
Brake Controller Installation - 2008 Chevrolet Silverado
Have a question for the experts, click here.