Installation Advice for Waterproof Trailer Light Kit with 25' Wiring Harness, Part # TL16RK

Expert Reply:

I do not have any specific instructions to give you, as many trailers have differing lighting locations. Start by mounting the lights in the desired location. The taillight with the yellow wire installs on the drivers side, the taillight with the green wire would mount on the passenger side. Run the wiring back from the trailer tongue so that the ground wire from the connector attaches to the trailer tongue. Run the yellow/brown wire down the drivers side. Tap the marker light for that side into the brown wire. At the rear, ground the white wire with the ring terminal to the trailer, and connect the yellow lead on the lamp to the yellow wire that you have run from the front, connect the brown wire on the lamp to the brown wire from the connector. Run the green/brown wire down the passenger side, picking up the marker light with the brown wire, and continue to the lamp on the rear connecting the green wire from the trailer connector to the green wire on the lamp, and the brown wire from the connector to the brown wire on the lamp. Ground the lamp to the trailer frame.

expert reply by: Mike L