How are the Two Leads Coming Out of Each Brake Magnet Wired?

Question:

Theres 2 wires coming out of the backing plate on each side. Theres 2 wires between the axels.How do i wire them. Your diagram is showing 1 blue wire from both backing plates and to the plug.

asked by: Jerry B

Expert Reply:

Each brake magnet will have two wires exiting it. One wire would connect to the wire which carries the brake output signal from the tow vehicle, the other would be grounded to the trailer frame. There is no polarity on the brake magnets, so it does not matter which wire is grounded and which is connected to the brake circuit.

expert reply by: Mike L

Product Page this Question was Asked From

Have a question for the experts, click here.

See What Others Are Saying